erlang,tsung , Tsung dynamic variables scope

Tsung dynamic variables scope


Tag: erlang,tsung

I want to write a test case for a user hitting a websockets server with thousands of different packets generated by tsung, but I received only the same packet thousands of times.

What is the scope of Tsung's dyn variables?

<session name="websocket" probability="100" type="ts_websocket">
  <setdynvars sourcetype="random_number" start="9" end="16">
    <var name="randomNum" />
  <for from="1" to="10" incr="1" var="counter">
    <request subst="true">
      <websocket frame="text" ack="no_ack" type="message">

For each user I'll receive 10 messages all with the same "randomNumber", but I want the number to change between each of those 10 messages.


We can close the question I just need to put dyn_variable inside for each.


How to make a gen_server reply with a message?

I have the gen_server shown below. It works for the most part. However when I start it from the shell the replies come right back to the shell prompt. I would have expected them to be sent as messages back to the shells pid and then I would use flush()...

Erlang result in accumulator

I'm trying to write a program that collects all Pythagorean triples equal to a given number; for example, calling main(12) should return [{3,4,5}]. But when I run my code, the answer is []. Can you tell me what I am doing wrong? -module(triples). -export([main/1]). t1(A, B, C) -> {A-2*B+2*C, 2*A-B+2*C,...

Manipulating XML element to get value from Sub-element in Erlang

I have this in Packet: {xmlelement,"message", [{"from", "[email protected]/26526129921433241378891365"}, {"to", "[email protected]/30014432481433242528199830"}], [{xmlelement,"received", [{"xmlns", "urn:xmpp:receipts"}, {"id", "018A12FB-0718-4304-87FD-430C59EDB4F9"}], []}]} I just need to get the value of the id attribute under the received XML element....

Getting SSL related error against my request to Ejabberd

Following is the code snippet where i open a socket to write APNS notifications on: get_socket()-> %%Options Options = [{certfile, ?Cert}, {keyfile, ?Key}, {mode, binary}], %%ssl connection ssl:connect(?Address, ?Port, Options, infinity) . close_socket(Socket)-> ssl:close(Socket). I am getting the following crash in my ejabberd.log file 2015-06-05 12:33:17.112 [error] <0.3134.0> gen_fsm <0.3134.0>...

Passing map type argument in function in Erlang complains error

Here's my code snippet. %% test.erl -export([count_characters/1]). count_characters(Str) -> count_characters(Str, #{}). count_characters([H|T], #{H := N} = X) -> count_characters(T, X#{H := N+1}); count_characters([H|T], X) -> count_characters(T, X#{H => 1}); count_characters([], X) -> X. %% ErShell 1> c(test). test.erl:19: illegal use of variable 'H' in map test.erl:20: illegal use of variable...

Erlang driver erl_errno issue

I am playing with erl_driver. Start callback of my driver is below: ErlDrvData drv_start(ErlDrvPort port, char* command) { char* file_name = command + sizeof(drv_name); GenTtyData* port_data = (GenTtyData*)driver_alloc(sizeof(GenTtyData)); erl_errno = gt_open(file_name, &port_data->file); if (erl_errno != 0) { // Assertion there is just to show you my intention assert(erl_errno == ENOENT);...

Why doesn't spawn link cause the calling process to die?

From the example given here, Erlang and process_flag(trap_exit, true) -module(play). -compile(export_all). start() -> process_flag(trap_exit, true), spawn_link(?MODULE, inverse, [***0***]), loop(). loop() -> receive Msg -> io:format("~p~n", [Msg]) end, loop(). inverse(N) -> 1/N. If I run it as, A = spawn(play, start, []). The spawned process <0.40.0> dies as it is suppose...

Erlang based chat (load balancing and notifications distribution)

We are going to develop a backend for our messenger, so I have one idea which I want describe here, maybe someone can give me an advice. 1) Idea: Nginx - redirects request to random node (round robin) -> Erlang cluster - redirects to actual node (we choose node with...

Fast mutable objects in Erlang

What is the best approach to store and manage high-performance mutable objects in Erlang? Assume that I want to write really simple online game server with realtime gameplay. Somehow I need to represent player's state in Erlang memory. For example, it could be just a simple tuple like {name, "Bob",...

Where does Elixir/erlang fit into the microservices approach? [closed]

Lately I've been doing some experiments with docker compose in order to deploy multiple collaborating microservices. I can see the many benefits that microservices provide, and now that there is a good toolset for managing them, I think that it's not extremely hard to jump into the microservices wagon. But,...

Pid as erlang maps key?

Can Pid be maps key ? Build maps from #{} syntax, The error says Pid can not be key. Bug build with maps module, Pid can be key. 18> 18> Pid = self(). <0.39.0> 19> #{Pid => 1}. * 1: illegal use of variable 'Pid' in map 20> 20> M1...

How to invoke Erlang function with variable?

4> abs(1). 1 5> X = abs. abs 6> X(1). ** exception error: bad function abs 7> erlang:X(1). 1 8> Is there any particular reason why I have to use the module name when I invoke a function with a variable? This isn't going to work for me because, well,...

Does the pattern [_|_] in Erlang mean anything specific?

I am learning Erlang from Learn You Some Erlang and I've seen the pattern [_|_] twice already but couldn't find any info on it. This usage seems superfluous because omitting it from (1) and subsituting it with _ in (2) yields the same result without degrading readability. It is my...

Erlang spawning large amounts of C processes

I've been looking into how I could embed languages (let's use Lua as an example) in Erlang. This of course isn't a new idea and there are many libraries out there that can do this. However I was wondering if it was possible to start a Genserver with state which...

Multiple specifications for same function in Erlang header file

I'm trying to specify a function in a header file. Like so: -spec update(pid(), tuple(tuple(), integer(), atom()), tuple(atom(), atom())) -> tuple(tuple(), integer(), atom()). Now I want to add some extra specification for this function because it has multiple different parameters. update(_Pid, {Specs, infinity, _State}, {Step}) -> timer:sleep(10000), {{Specs, infinity}, {Step}};...

Erlang syntax error unclear

I just got started with Erlang. I am trying if statement. I found out one particular behavior which I do not understand. the following statement does work perfectly. some_comp(Arg1) -> if (cal(Arg1)>50000)->'reached'; true -> 'invalid' end. cal(Arg2)-> %% some calculation. However the following shows an error syntax near if: some_comp(Arg1)...

Jabber user going offline: Why the two different scenarios?

I have an Android client working in tandem with ejabberd XMPP server. Observations: Scenario 1: When I swipe-right the app (kill the app), the user goes offline on the server immediately. Its status is changed to offline at that very instant. Scenario 2: However, when I simply shut-down the Wi-fi...

How to list all the bucket types in riak?

Using Riak Client(erlang), I can list all the buckets of the default bucket type. But how can I list all the bucket types? Or If I can't do this by the client, how can I find out about this?

Wait for Node.connect before using :global.whereis_name

I have the following function: def join(id) do if Node.connect(:"#{id}@") do send :global.whereis_name(id), {:join, id} end end I receive the error: (ArgumentError) argument error :erlang.send(:undefined, ... which I assume is because Node.connect does some gathering of information and when I call :global.whereis_name it has not finished yet. If I throw...

Is ++ operator more expensive than | operator in Erlang?

I was reading Learn You Some Erlang and I came upon this example in the Recursion chapter. tail_sublist(_, 0, SubList) -> SubList; tail_sublist([], _, SubList) -> SubList; tail_sublist([H|T], N, SubList) when N > 0 -> tail_sublist(T, N-1, [H|SubList]). As the author goes on to explain that there is a fatal...

Pattern matching the fields of a map in erlang

I'm currently reading book << Programming Erlang, 2nd edition >>. When I looked through the pattern matching of Map's field, the code snippet in the book complains some error on my Erlang prompt. %% Book's version 1> Henry8 = #{ class => king, born => 1491, died => 1547 }....

Find the minimum value in a map

I have a map organized as follows.Key is a simple term lets say an integer but the value is complex tuple {BB,CC,DD}. What is the best way to find the minimum CC in the map ? So far I have the following -module(test). -author("andre"). %% API -export([init/0]). init() -> TheMap...

erlang os:cmd() command with UTF8 binary

I'm trying to get an Erlang function to execute a bash command containing unicode characters. For example, I want to execute the equivalent of: touch /home/jani/ჟანიweł I put that command in variable D, for example: io:fwrite("~ts", [list_to_binary(D)]). touch /home/jani/ჟანიwełok but after I execute: os:cmd(D) I get file called á??á??á??á??weÅ?. How...

erlang processes and message passing architecture

The task I have in hand is to read the lines of large file, process them, and return ordered results. My algorithm is: start with master process that will evaluate the workload (written in the first line of the file) spawn worker processes: each worker will read part of the...

Adding to an existing value in Erlang

I am attempting to create a function that stores a number into a record and then adds value X to that number every time the function runs. Value: 5 Run Function (Add One): 1 Value should be: 6 Run Function (Add One): 1 value should be 7 I tried to...

erlang message passing architecture

In erlang if two processes A and B are sending message to a process C simultaneously. Will there be a race condition? C ! {very large message} sent by A C ! {very large message} sent by B Will C receive the complete message from A and then proceed for...

how to handle low_entropy exception of crypto:strong_rand_bytes(N)?

I want to generate cryptographically strong pseudorandom numbers in erlang for session IDs. There is crypto:strong_rand_bytes(N). What if it throws the low_entropy exception? From strong_rand_bytes(N) -> binary() Types: N = integer() Generates N bytes randomly uniform 0..255, and returns the result in a binary. Uses a cryptographically secure prng...

Elixir exrm release crashes on eredis start_link

I'm fairly new to Elixir and this is the first app that I'm attempting to release using exrm. My app interacts with a Redis database for consuming jobs from a queue (using exq), and also stores results of processed jobs in Redis using eredis. My app works perfectly when I...

What is the difference between .app and .app.src files in Erlang?

I found these description in the Erlang doc and, but not sure which one is the "Application Resource File". When should I use .app and .app.src? 7.3 Application Resource File The Application Resource File

Erlang pass-by-reference nuances

9> A = lists:seq(1,10). [1,2,3,4,5,6,7,8,9,10] 13> Fn = fun (L) -> [0|L] end. #Fun<erl_eval.6.90072148> 14> Fn(A). [0,1,2,3,4,5,6,7,8,9,10] 15> A. [1,2,3,4,5,6,7,8,9,10] If erlang internally passes by reference (see this), why does the value of A not reflect the change? What fundamental am I missing about passing-by-reference or erlang?...

First word of binary string erlang

I need to do something like this <<"Some text in binary">>, and it should return <<"Some">. How can i do it without split function, only by pattern matching and select/if cases with Erlang. Thank you.

Fetching and updating data in mnesia

I have multiple mnesia tuples like (GroupID is the primary key) {GroupID, GroupName, GroupType, GroupDescription, GroupTag, CreatorID, AdminID, MemberList, Counter}. MemberList = "[email protected],[email protected],[email protected]". GroupName = "Any String Value". % e.g.: "basketball" GroupTag = "comma separated values". % e.g.: "Sports,Cricket,Fifa,Ronaldo" I will pass a character or word to a function. This...

Value from binding in LFE interpreter using Erlang

I'd like to use Lisp Flavored Erlang as a scripting extension language for an Erlang application. If you want, in a similar way GNU Emacs is configured and extended via Emacs Lisp. I know that the argument is wide and structured; but in the specific case of this question I'd...

gen_server handle_info/2 clarification

While reading through Erlang and OTP in action, I ran across some weird syntax regarding records that I'm having trouble wrapping my head around. I'm hoping someone can clarify what's going on in the handle_info for timeouts here: handle_info({tcp, Socket, RawData}, State) -> do_rpc(Socket, RawData), RequestCount = State#state.request_count, {noreply, State#state{request_count...

How to read and write id3v1 and id3v2 tags in Elixir

I would like to scan music files and read/write metadata using Elixir (this whole project is about learning Elixir - so please don't tell me to use Python!). As I understand it, I have two choices: call a system utility or (as no libraries exist in Erlang or Elixir that...

ctrl+G in erl doesn't work

I'm trying to interconnect erlang nodes, but entering ctrl+G doesn not work: Eshell V6.4.1 (abort with ^G) 1> ^G Eshell V6.4.1 (abort with ^G) 1> ^G Eshell V6.4.1 (abort with ^G) 1> ^G Eshell V6.4.1 (abort with ^G) any idea why this can happen? I was thinking about locale settings,...

Exception handling in Erlang to Continue execution

What I am trying to do is mochijson2:decode(Ccode) generates any exception or error, program execution should not stop and case branch {error, Reason} should get executed. But when I am trying to get it implemented, it generates error at first line while checking and code doesn't continue execution for lines...

Type errors in dialyzer in function with specified type

I am receiving an error in dialyzer when it analyzes the following function. -spec do_request(Method, Type, Url, Expect, Headers, Body, Client) -> Response::client_response() when Method :: method(), Type :: content_type(), Url :: url(), Expect :: status_codes(), Headers :: headers(), Body :: body(), Client :: #client{}. do_request(Method, Type, Url, Expect, Headers,...

Does Erlang has Map?

It seems that Erlang introduced maps in version R17A. But, if I go to downloads I only see version 17.5, there's no version R17A. So, is it released and stable yet? Does the latest stable Erlang has Map support?...

Convert bitstring to tuple

I'm trying to find out how to convert an Erlang bitstring to a tuple, but so far without any luck. What I want is to get from for example <<"{1,2}">> the tuple {1,2}....

Erlang: Returning a function from a function

I know Erlang supports anonymous functions. My question is, can I return a function from a function then call that returned function from outside? If so, how do I do it? I know this is possible in many languages such as C and Python. Here is what I tried to...

Riak mapReduce fails with > 15 records

Problem I've been learning Riak and ran into an issue with mapReduce. My mapReduce functions work fine when there's 15 records, but after that, it throws a stack trace error. I'm new to Riak and Erlang, so I'm unsure whether it's my code or it's Riak. Any advice on how...

How to upgrade from R16B to 17? list_to_binary breaks if there are Chinese characters inside

We are using R16B03-1 and trying to upgrade to R17. iolist_to_binary and list_to_binary breaks if there are Chinese characters inside. I googled and found following links to explain the problem. The default encoding of Erlang files has been changed from ISO-8859-1 to UTF-8. The encoding of XML files has...

Modifying an Erlang Record [duplicate]

This question already has an answer here: Adding to an existing value in Erlang 2 answers I know that a record in Erlang cannot be changed once it has been set. I am attempting to use a record to increase a value. add_new_num() -> Number = random:uniform(6), STR =...

Erlang basic syntax error

I try to learn Erlang. I've installed a runtime but cannot get it working. The following code: X=3. works, but the following doesn't f(X)->X. or F() ->0. or F([])->[]. etc. all produce "1: syntax error before: '->'" I tried the "word_count" from this tutorial: and I get the same...

How to rewrite Erlang combinations algorithm in Elixir?

I've been tinkering with Elixir for the last few weeks. I just came across this succinct combinations algorithm in Erlang, which I tried rewriting in Elixir but got stuck. Erlang version: comb(0,_) -> [[]]; comb(_,[]) -> []; comb(N,[H|T]) -> [[H|L] || L <- comb(N-1,T)]++comb(N,T). Elixir version I came up with...

How to delete the whole directory which is not empty?

I want to clean the temporary for collecting resource. The file module only has del_dir/1 which require the directory is empty. But there is not function the get the all files in the directory (with absolute path") The source code is as follows, how to correct it? delete_path(X)-> {ok,List} =...

Mnesia pagination with fragmented table

I have a mnesia table configured as follow: -record(space, {id, t, s, a, l}). mnesia:create_table(space, [ {disc_only_copies, nodes()}, {frag_properties, [ {n_fragments, 400}, {n_disc_copies, 1}]}, {attributes, record_info(fields, space)}]), I have at least 4 million records for test purposes on this table. I have implemented something like this Pagination search in Erlang...

Getting a sibling process in Elixir

I have an Elixir/Erlang process tree: parent (Supervisor) ├── child1 (GenServer) └── child2 (GenServer) child1 (a DB client) has information that child2 needs to use. What's a good way to pass a reference from the Supervisor process to child2 so that child2 will always have a valid reference to child1?...

passing arrays to a function in erlang

I am new to erlang programming and as a matter of fact no very experienced programmer. I need to pass an array to a function and then manipulate it.. however I have so far not be this what I found. module(easy). export([myfunction/1]). myfunction([myarray]) -> %% mycode.. hier I will need...