osx,unreal-engine4 , Unreal engine - complaints for needing 8 GB of memory even though I have 8GB memory


Unreal engine - complaints for needing 8 GB of memory even though I have 8GB memory

Question:

Tag: osx,unreal-engine4

I have a Mac OS X with 8 GB 1600 MHz DDR3 RAM and when I start unreal engine it complaints about Low RAM and asks that for best performance I should have at least 8 GB of RAM.

I'm not sure why is this is case, is it possible that its getting a lower share of RAM or something similar?

The Unreal Editor version is 4.7.5

Edit: The processor is 2.3 GHz Intel Core i7, and is 64 bit.

Edit: The graphic processor is Intel Iris Pro 1024 MB.


Answer:

Why would UE4 not be able to access all of your RAM? I do not consider that case very likely.

Also, I would not worry about the RAM usage of UE4 too much. I do a lot of work with the engine and it rarely uses more than 3GB of RAM. Just make sure that your system as a whole has enough RAM for the running processes to prevent swapping.

Anyway, the bottleneck in your system is probably the graphics processor, so if your engine runs too slowly you should reduce the performance setting inside the engine.


Related:


Restrict input on NSTextField


osx,swift,cocoa,nstextfield
I want to restrict character input on NSTextField, i.e. so that disallowed characters aren't even appearing. Most of what I found about this topic were solutions that only validate after text input finished or using NSFormatter which still allows the character to appear. So far I came up with this...

Simulating HID on OSX : IOBluetooth or CoreBluetooth?


ios,osx,core-bluetooth,iobluetooth
I'm intending on doing some simple experiments sending simulated key strokes from mac to IOS and I'm trying to decide which framework to spend my effort on. The impression I get is that CoreBluetooth is too high level for this and that IOBluetooth would be the best choice. Is IOBluetooth...

Native Code: cannot use typeid with -fno-rtti


c++,osx,gcc,android-ndk,vtk
I'm trying to build native code on android because I want to use VTK for my android tablet. However, I am facing some issues when it comes to building one of the vtk examples. I know this problem has been covered here for an objective c issue but I guess...

ffmpeg: wmv files generated on Mac can't be played in Windows


windows,osx,ffmpeg,file-conversion,wmv
On Mac OS X 10.6.8, I converted a animated gif to a video file in wmv (a requested file format) by using ffmpeg -i File.gif -s 400x400 NewFile.wmv The video file played fine using VLC on Mac. The file can't be played on a Windows 7 machine using the Windows...

C++ basic fileIO locations


c++,osx,file-io
so I'm just starting to learn fileIO. I've been using a program called CodeRunner on my mac and I have a folder that contains: validsudoku.cpp, validsudoku, sudokugood0.txt The beginning of the code I wrote is: int main(int argc, char const *argv[]){ //string filetoopen; ifstream sudokutxtfile; string txtline; string sudokubox[9]; //bool...

How can I fix “Error: Formulae found in multiple taps”?


php,osx,homebrew,phpredis
I want to install php54-redis. Yu:nginx Yu$ brew install josegonzalez/php/php54-redis ==> Installing php54-redis from josegonzalez/homebrew-php Error: Formulae found in multiple taps: homebrew/php/php54 josegonzalez/php/php54 Please use the fully-qualified name e.g. homebrew/php/php54 to refer the formula. What am I doing wrong and how is thise done properly?...

Stuck with creating an event and formatting dates (Swift - EventKit - OS X)


ios,osx,swift,eventkit,ekevent
I have been stuck on trying to hardcode a new event. My difficulty lies especially with the dates and formatting let dateFormatter = NSDateFormatter() dateFormatter.dateFormat = "MM'/dd'/YYYY" var dateString = "07/16/2015" var startDate = dateFormatter.dateFromString(dateString) var endDate = dateFormatter.dateFromString(dateString) var newEvent : EKEvent = EKEvent(eventStore: store) var error : NSError?...

How to get NSTableView to use a custom cell view mixed with preset cell views?


osx,swift,cocoa,nstableview,nstableviewcell
I have a NSTableView configured in Interface Builder which uses several default cell views. However the first column's cell view needs to be created from a custom class. How do I implement NSTableViewDataSource method tableView.viewForTableColumn() so that it creates the default cell views for the remaining columns? Here's my method...

OSX tmux configuration session open file in vim automatically


osx,session,vim,configuration-files,tmux
So I have tmux and vim running in iterm2 on OSX. I have a tmux.conf file that sources a session in ~/.tmux/ called 'left'. I have successfully loaded this session with three panes. Two panes in a left column and a single pane on the right. I have also managed...

fatal error: limits.h: No such file or directory


xcode,osx,gcc
On OSX, I can't compile simple programs from the command-line when I use an externally-provided compiler (e.g. gcc-4.8). System headers like limits.h cannot be found. Example error messages: fatal error: limits.h: No such file or directory Or: fatal error: stdio.h: No such file or directory and so on. What's wrong?...

iOS : pod update (unable to find the utility “xcode-select”)


ios,xcode,osx,xcode6,cocoapods
xI am a new iOS developer. Recently when I ran "pod update" sth just went wrong see the detail in the following: (unable to find the utility "xcode-select") bash-3.2$ pod install Analyzing dependencies sh: line 1: 4936 Abort trap: 6 /Applications/Xcode.app/Contents/Developer/usr/bin/xcodebuild -sdk / -find xcode-select 2> /dev/null xcrun: error: unable...

Eclipse CDT - No Console Output on OSX


c++,eclipse,osx,terminal,64bit
New to the C++ world and wanted to fiddle around using Eclipse's IDE for C/C++ called CDT. I am on OSX 10.10.2 using eclipse-cpp-luna-SR2-macosx-cocoa-x86_64. Sadly this simple example is not printing anything in the eclipse terminal. #include <iostream> using namespace std; int main() { cout << "Hello World" << endl;...

Change NSTextField border and BG color while editing


osx,swift,cocoa,nstextfield
I have a NSTextField that uses no border and window background color while it is displayed but I want it to change to have the default border and white BG color when being edited. I know I can change these properties with: nameTextField.bezeled = true nameTextField.backgroundColor = NSColor.textBackgroundColor() What I...

Context Pointer Lost in FSEventStreamCreate Callback (c++)


c++,osx,qt,fsevents,file-watcher
im trying to test a simple filewatcher in mac using the FSEvent Api. I get the callback with the events and everything seems to work but i can't recover the info contained in the info field of the context structure. Here is my code: void feCallback(ConstFSEventStreamRef streamRef, void* pClientCallBackInfo, size_t...

Packaging Kivy Python applications on OSX Yosemite not working


python,osx,kivy,pyinstaller
I'm trying to package a Kivy/Python application on Yosemite with pyinstaller (OSX 10.10, Kivy 1.9, pyinstaller 2.1) and not having much success, via the Kivy OSX package how-to. After troubleshooting my PYTHONPATH to make sure it included Kivy and all the dependencies, I tried just building their demo touchtracer app,...

ASP.NET vnext overriding status code set in controller. Is this a bug?


osx,asp.net-5,kestrel
I'm building a simple WebApi in asp.net vnext on a Mac. I've followed the example set in this tutorial but I'm having a problem where the response codes I set in my controller methods are being overridden Take this method in my CrudController: [HttpPost] public void Post([FromBody]CrudObject crudObject) { var...

What's the shortcut to interrupt the kernel in Canopy?


osx,kernel,interrupt,shortcut,canopy
I'm on OSX, using canopy. Does anybody know what the shortcut for interrupting the kernel is? Thanks.

Resize images to specific width only (AppleScript or Automator)


image,osx,applescript,image-resizing,automator
I've been searching google.com a couple of hours trying to find a way to do this, but there is no answer. Everywhere is resize to the longest size, but nothing about resize to the specified width only. Is there any way in Automator or AppleScript to resize images to a...

Excel Doc macro yields “Named argument not found (Error 448)”


excel,osx,vba,excel-vba,excel-vba-mac
This snippet of code appears to run perfectly fine in Excel on Windows. But on OSX, its erroring out with a "Named argument not found (Error 448)". With Sheets("Colors") Set rangeFound = .Cells.find(What:=Resource, After:=.Cells(1, 1), LookIn:=xlValues, _ LookAt:=xlPart, SearchOrder:=xlByRows, SearchDirection:=xlNext, _ MatchCase:=False, SearchFormat:=False) End With ...

Crash when processing `__Atom` class object in Objective C (using Objective C runtime )


objective-c,osx,objective-c-runtime
Hi I'm using this answer to get list of class to automatically build some structure. My code looks like that: NSMutableDictionary *result = [NSMutableDictionary dictionaryWithCapacity: 32]; Class* classes = NULL; int numClasses = objc_getClassList(NULL, 0); if (numClasses > 0 ) { classes = (Class*)malloc(sizeof(Class) * numClasses); numClasses = objc_getClassList(classes, numClasses);...

Set CALayer Gradient Background


objective-c,xcode,osx,cocoa,cocoa-touch
I am trying to add a gradient to a CALayer I have created. I can set the background colour of the CALayer with the following: self.colorLayer = [CALayer layer]; [self.colorLayer setBackgroundColor:color.CGColor]; [self.colorView setWantsLayer:YES]; [self.colorView setLayer:self.colorLayer]; I've looked around with no success (surprisingly I thought this would have been answered many...

What is the best way to make sure I am not using any unavailable API's on OSX?


objective-c,xcode,osx,cocoa
I am writing an OSX app in Xcode 6 but want my application to have support for OSX 10.7 and up. Unfortunately Xcode 6 only includes SDK for 10.10 and 10.9. What is the best way to make sure I am not using any unavailable API's that would crash on...

Read plist inside ~/Library/Preferences/


objective-c,xcode,osx
I'm trying to access in ~/Library/Preferences/ but my code doesn't work. NSString *resPath = @"~/Library/Preferences/"; NSError *error = nil; NSArray *filenames = [[NSFileManager defaultManager] contentsOfDirectoryAtPath:resPath error:&error]; if (!error) { for (NSString * filename in filenames) { NSLog(@"%@", filename); } } Maybe I should ask for some permission.. Any idea?...

How to programatically make a key shortcut?


osx,bash,task-switching
I'm not even sure if bash is the most proper way to achieve this but, I need to, programmatically, switch between opened applications on OS X. I'm thinking about doing a bash program to execute "cmd+tab". I'm unable to find this on a regular search, so, perhaps someone can point...

Display django runserver output from Vagrant guest VM in host Mac notifications?


python,django,osx,notifications,vagrant
I can think of many ways to skin this cat, and Googling hasn't shown an elegant solution either. Does anyone have an easy / elegant way to forward the output from Django's runserver command in a terminal connected to a guest Vagrant VM to the host to display to Mac's...

CGDisplayCopyAllDisplayModes leaves out one valid mode


osx,swift,core-graphics
When programmatically working with display modes in OS X (documentation), I've found that the CGDisplayCopyAllDisplayModes leaves out the rightmost option that is presented in System Preferences. A simple utility that prints the size of the current display mode and all available display mode sizes outputs this current size: 1920x1200 available...

Mac - How to programatically hide NSApplicationActivationPolicyAccessory or LSUIElement application?


osx,cocoa
I have a small Swift-based Cocoa app that I'm writing. It's a single window app, something like Spotlight/QuickSilver/Alfred. It's set as NSApplicationActivationPolicyAccessory (docs) (though I've tried the same thing using LSUIElement, which is equivalent). It's activated via a global hot key. Everything works well, except that when it's active I...

Mac OSX - Allow for user input in shell script via GUI or Prompt


osx,bash,shell
first time post so please let me know how I could improve.. I created a shell script which requires a person to input their name and then generates a report. The script works as needed when chmod'd into an executable script and run from terminal. But, I would like to...

Binding an NSTableView to an array of strings in Swift


osx,swift,cocoa,nstableview,cocoa-bindings
I'm showing the contents of an array of strings with an NSTableView via binding through an Array Controller. I have "NSString" in Class Name in the attributes inspector for the Array Controller and in the Model Key Path of the Array Controller's binding inspector I have the path to my...

best way to create a mat from a CIImage?


c++,xcode,osx,opencv,opencv3.0
I am using CIDetector to detect faces, then using OpenCV on the lower half of each face to detect the size of any smiles. I am using the below code to create the cv::mat which OpenCV can perform the detection on, as you can see the image goes through the...

Use Unix Executable File to Run Shell Script and MPKG File


osx,shell,unix
I have 2 shell scripts and 2 mpkg installer, I am trying to use an unix excitable file to run them all. here is the script I have, but it always has error message "No such file or directory" ? #!/bin/sh # Find the absolute script current path path=$( cd...

Swift Dictionary with Protocol Type as Key


ios,osx,swift,dictionary,protocols
short question here: I got a protocol protocol SCResourceModel {..} and a dictionary which shall use this protocol type as key: [SCResourceModel : String]. This obviously does not work, as a key in a dictionary has to conform to the protocol Hashable. Making my SCResourceModel inherit from Hashable or trying...

Change the “about this” window on mac app


java,osx,deployment
On Macs, there's a default menu at the top for basic application handling functions: I've made an application using Java for my Grade 10 final project, (and I'm quite convinced that it's better than Microsoft Paint) and I decided to package it. Using Eclipse, I exported it as a Mac...

JSON in Python: encoding issue on OS X, no issue on Windows


python,json,windows,osx,encoding
I have a file log.json that contains one line: {"k":"caf\u00e9"} I run the following code on Windows 7 SP1 x64 Ultimate: import json a = json.load(open('log.json', 'r')) f = open('test.txt', 'w') f.write(a['k']) I don't have any issue. When I run the same code on Max OS X 10.10 x64: Traceback...

Call to implicitly-deleted copy constructor in LLVM(Porting code from windows to mac)


c++,osx,c++11,compiler-errors,llvm
We are in the process of porting some c++ code from windows to mac and are having issues compiling it with LLVM 6.1 using c++11. We are encountering errors all over the place of "Call to implicitly-deleted copy contructor" Some of these errors are popping up in our code. for...

When listing the contents of /usr/sbin what is the meaning behind color codes of individual programs?


osx,bash
I see dozens of programs, some written in different colors in my shell, others with different background colors. Google isn't helping on this. ...

Capitalize all files in a directory using Bash


osx,bash,rename
I have a directory called "Theme_1" and I want to capitalize all the filenames starting with "theme". The first letter of every file name is lowercase and I want it to be upcase. I've tried this but all the letters in the filename are upcase, which is not what I...

Cocoa ViewController.m vs. Cocoa Touch ViewController.m


objective-c,osx,cocoa
Total newbie question follows... I am learning Objective C based Cocoa (OS X) app development. Most of the books and videos I have are iOS based, so I'm seeing how the two platforms differ. I have converted a simple iOS app to OS X. I got the converted OS X...

Using subprocess.check_output for a command with 2>/dev/null


python,osx,subprocess
I am on Mac OS X Yosemite 10.10 and Python 2.7. If I type the following: du -g -d1 /Users 2> /dev/null in the command line, everything works perfectly. Now, my goal is to use that command in a python script. My idea was to use the following: import subprocess...

Run Boot2Docker from bash


osx,bash,docker,boot2docker
I have installed Boot2Docker on my Mac. By clicking on the app icon, a terminal window opens with some bash script running to prepare the docker vm and then you're good to go. My problem is, I want to write a bash script to run the Boot2Docker vm and then...

Login with Facebook option trigger suggest to download an app


android,ios,facebook,osx,login
Yesterday I logged in to Airbnb with my Facebook account on my OSX. Shortly later I got a notification both on my iPhone and computer saying "Airbnb is available to install on your iPhone" My question is, does anyone here know how this was done? Is this a feature available...

What is the meaning of the libstdc++6.dylib version number on mac os x?


osx,g++,macports,libstdc++
I try to determine which version of libstdc++ is running by the gcc5.1 port on Mac OS X (Yosemite 10.10.3). The otool command gives the following information: /opt/local/lib/libgcc/libstdc++.6.dylib (compatibility version 7.0.0, current version 7.21.0) What is the meaning of version 7.21.0? libstdc++7 does really exist?...

How do you work with views in MainMenu.xib?


objective-c,xcode,osx,cocoa
I'm coming over from iOS development and I can't figure out this basic thing: if I open MainMenu.xib in Interface Builder and I drag a button onto the main window's view, what class should I connect that button's action to -- the App Delegate? If I want to add a...

pcap_dispatch() always returns 0 on Mac OSX for wifi interface


osx,pcap,libpcap,arp
I have few devices connected to wifi router, but pcap_dispatch() always returns 0 for wifi interface while live capturing on Mac OS X. The same code captures response in case of wired interface. Please clarify if I have missed any flag here.

How to uninstall all python versions and use the default system version of OS X 10.10?


python,osx
I'm looking for a way to cleanly uninstall all versions of python on OS X 10.10 except the default version that followed with the Mac. How do I proceed? Currently I've some weird behaviour. When typing which -a python I get the following output: /Users/harisfawad/anaconda/bin/python /Library/Frameworks/Python.framework/Versions/2.7/bin/python /usr/local/bin/python /usr/bin/python Why doesn't...

Open New Window in Swift


osx,swift,cocoa,storyboard,nswindow
I am trying to open a new window in my Swift application but I cannot get it to open. class AppDelegate: NSObject, NSApplicationDelegate { func applicationDidFinishLaunching(aNotification: NSNotification) { openMyWindow() } func openMyWindow() { if let storyboard = NSStoryboard(name: "Main",bundle: nil) { if let vc = storyboard.instantiateControllerWithIdentifier("MyList") as? MyListViewController { var...

How to get CPU utilization in % in terminal (mac)


osx,terminal,cpu
Ive seen the same question asked on linux and windows but not mac (terminal). Can anyone tell me how to get the current processor utilization in %, so an example output would be 40%. Thanks

How to display Apple San Francisco's numbers mono-spaced rather than proportionally?


osx,fonts,apple
I've recently installed El Capitan on OSX, which comes with the new San Franciso font as system font. The apple presentation here https://developer.apple.com/videos/wwdc/2015/?id=804 (Bit of an overview here: http://codemotionapps.com/san-francisco-display-vs-text-compact-vs-normal-a-brief-review/) states that, by default, numbers are displayed proportionally. They do allow to switch to displaying them mono-spaced (at least in their...

django-admin startproject not working with python3 on OS X


python,django,osx,python-2.7,python-3.x
I have python3 installed with Django 1.8.2 on Mac OS. There is also python 2.7 installed by default with the OS. When trying to run startproject I get - $ django-admin startproject mysite Traceback (most recent call last): File "/usr/local/bin/django-admin", line 7, in <module> from django.core.management import execute_from_command_line ImportError: No...

Initializing a xib view as a subview of another NSView


objective-c,osx,cocoa,xib,nib
I'm trying to learn OSX development, and I've created a view in a .xib file, and I'm trying to initialize and then add this view as a subview. I've googled how to do this, and all of the solutions are for iOS and use a call such as MyViewClass* myViewObject...