python-2.7,3d,leap-motion , finger position using leap motion

finger position using leap motion


Tag: python-2.7,3d,leap-motion

i want to use Leap Motion to get my Index finger Tip position in the space ( 3D position X,Y,Z ) , how can i do that in leap motion ?

this is what i do only to detect index finger, but there an error :

def on_frame(self, controller):
    # Get the most recent frame and report some basic information
    frame = controller.frame()

    finger = Finger.TYPE_INDEX
    print('Type :  '+finger.type())

i am a leap motion beginner, i want you to guide me how to do that, and if there is any examples or codes ?

thanks :)


First off, have a look at the documentation for the Leap Motion Python API. Then examine the program in the SDK samples folder. provides an example for getting just about every piece of information available from the API.

For your specific problem above, Finger.TYPE_INDEX gives you an enumeration or name for the index finger; it does not give you an instance of an object representing the index finger -- there's an index finger for each of your hands and there can be multiple hands in the Leap device's field of view -- so which index finger should it return?

You can get the list of all tracked fingers from frame.fingers() and the list of the tracked fingers for a particular hand from hand.fingers(). From these lists, you can filter for a particular type of finger using the name (i.e. Finger.TYPE_INDEX or TYPE_THUMB).

def on_frame(self, controller):
    # Get the most recent frame and report some basic information
    frame = controller.frame()

    fingers = frame.fingers()
    index_fingers = fingers.finger_type(Finger.TYPE_INDEX)
    for(finger in index_fingers):
        print('Type :  '+finger.type())


delete data from mysql table based on multiple conditions

i need to delete rows from MySQL table which is very huge.I have multiple conditions check before deleting the data. my table looks like: data(table name): name mobile email address source xyz 871 [email protected] 1.txt bac 123 null 2.XLS TST 456 [email protected] 3.xls yup 897 null abcde web null [email protected]..

Use NamedTemporaryFile to read from stdout via subprocess on Linux

import subprocess import tempfile fd = tempfile.NamedTemporaryFile() print(fd) print( p = subprocess.Popen("date", stdout=fd).communicate() print(p[0]) fd.close() This returns: <open file '<fdopen>', mode 'w' at 0x7fc27eb1e810> /tmp/tmp8kX9C1 None Instead, I would like it to return something like: Tue Jun 23 10:23:15 CEST 2015 I tried adding mode="w", as well as delete=False, but...

How to specify string variables as unicode strings for pattern and text in regex matching?

>>> import re >>> re.match(u'^[一二三四五六七]、', u'一、') If the pattern and the text are stored in variables (for example, they were read from text files), >>> myregex='^[一二三四五六七]、' >>> mytext='一、' How shall I specify myregex and mytext to re.match, in the same way as re.match(u'^[一二三四五六七]、', u'一、')? Thanks....

Sort List of Numbers according to Custom Number Sequence

Question :A set of numbers will be passed as input. Also the redefined relationship of the digits 0-9 in ascending order will be passed as input. Based on the redefined relationship, the set of numbers must be listed in ascending order. Input Format: The first line will contain the the...

Python Popen - wait vs communicate vs CalledProcessError

Continuing from my previous question I see that to get the error code of a process I spawned via Popen in python I have to call either wait() or communicate() (which can be used to access the Popen stdout and stderr attributes): app7z = '/path/to/7z.exe' command = [app7z, 'a', dstFile.temp,...

Pass function call as a function argument

Code: def function1(a,b): return a-1,b-1 def function2(c,d): return c+1,d+1 print function1(function2(1,2)) Error: Traceback (most recent call last): File "C:\Users\sony\Desktop\Python\scripts\", line 6, in <module> print function1(function2(1,2)) TypeError: function1() takes exactly 2 arguments (1 given) [Finished in 0.1s with exit code 1] Why the above error? ...

I need to make sure that only certain characters are in a list?

I have this to get input and put it in a list: def start(): move_order=[raw_input("Enter your moves: ").split()] And I only want the characters A, D, S, C, H (it's for a game >_>) to be allowed. I've tried using the regular expressions stuff: if re.match('[ADSCH]+', [move_order]) is False: print...

Slicing a Python OrderedDict

In my code I frequently need to take a subset range of keys+values from a Python OrderedDict (from collections package). Slicing doesn't work (throws TypeError: unhashable type) and the alternative, iterating, is cumbersome: from collections import OrderedDict o = OrderedDict([('a', 1), ('b', 2), ('c', 3), ('d', 4)]) # want to...

Strange Behavior: Floating Point Error after Appending to List

I am writing a simple function to step through a range with floating step size. To keep the output neat, I wrote a function, correct, that corrects the floating point error that is common after an arithmetic operation. That is to say: correct(0.3999999999) outputs 0.4, correct(0.1000000001) outputs 0.1, etc. Here's...

Count function counting only last line of my list

Count function counting only last line of my list N = int(raw_input()) cnt = [] for i in range(N): string = raw_input() for j in range(1,len(string)): if string[j] =='K': cnt.append('R') elif string[j] =='R': cnt.append('R') if string[0] == 'k': cnt.append('k') elif string[0] == 'R': cnt.append('R') print cnt.count('R') if I am giving...

Python initialize strings as variable

I have a calculation schema as string calc = "((k+m+46)/2)" and some strings containing variable like m = 2 k = m*2 all only strings. Now I want to initialize them into Python. my goal is it to calculate with the calculating schema the varible values. calc should return 26...

how to fetch a column in browse_record_list in orm browse method in openERP

I'm beginner in openERP. I'm trying to get a column in a table. While using ORM browse method and iterating that object i got the result in browse_record_list as browse_record(,21). I want to fetch that particular id 21 alone through that browse method but instead im getting same browse_record as...

Python - Terminate Child Process or PID?

I have a script (simplified below) that initiates another python process. I know the process name and PID for the current and child processes. When I attempt to terminate the child process - menu option (2) - I get the message "local variable 'py_process' referenced before assignment." Suggestions to terminate...

multiple iteration of the same list

I have one list of data as follows: from shapely.geometry import box data = [box(1,2,3,4), box(4,5,6,7), box(1,2,3,4)] sublists = [A,B,C] The list 'data' has following sub-lists: A = box(1,2,3,4) B = box(4,5,6,7) C = box(1,2,3,4) I have to check if sub-lists intersect. If intersect they should put in one tuple;...

How do I copy a row from one pandas dataframe to another pandas dataframe?

I have a dataframe of data that I am trying to append to another dataframe. I have tried various ways with .append() and there has been no successful way. When I print the data from iterrows. I provide 2 possible ways I tried to solve the issue below, one creates...

How to check for multiple attributes in a list

I am making a TBRPG game using Python 2.7, and i'm currently making a quest system. I wanted to make a function that checks all of the quests in a list, in this case (quests), and tells you if any of of the quests in the list have the same...

Pandas Dataframe Complex Calculation

I have the following dataframe,df: Year totalPubs ActualCitations 0 1994 71 191.002034 1 1995 77 2763.911781 2 1996 69 2022.374474 3 1997 78 3393.094951 I want to write code that would do the following: Citations of currentyear / Sum of totalPubs of the two previous years I want something to...

Why does `for lst in lst:` work? [duplicate]

This question already has an answer here: Why can I use the same name for iterator and sequence in a Python for loop? 6 answers The following code lst = ['foo', 'bar', 'baz'] for lst in lst: print lst gives me this output foo bar baz I would expect...

Who calls the metaclass

This actually stems from a discussion here on SO. Short version def meta(name, bases, class_dict) return type(name, bases, class_dict) class Klass(object): __metaclass__ = meta meta() is called when Klass class declaration is executed. Which part of the (python internal) code actually calls meta()? Long version When the class is declared,...

Anaconda site-packages

After installing a package in an anaconda environment, I'll like to make some changes to the code in that package. Where can I find the site-packages directory containing the installed packages? I do not find a directory /Users/username/anaconda/lib/python2.7/site-packages...

How to skip a function

I am learning python and trying to make a little game. So my question is can you define a function but skip it and use it later. EX. def func() print"1,2,3,4" func() def func2() print "counting" func() func2() How would I skip func but still be able to print it...

Compare 2 seperate csv files and write difference to a new csv file - Python 2.7

I am trying to compare two csv files in python and save the difference to a third csv file in python 2.7. import csv f1 = open ("olddata/file1.csv") oldFile1 = csv.reader(f1) oldList1 = [] for row in oldFile1: oldList1.append(row) f2 = open ("newdata/file2.csv") oldFile2 = csv.reader(f2) oldList2 = [] for...

Is there a way to say for every x values, do this?

Before I start, I am new to Python, so any low-level description would be incredibly helpful! I have a list of lets say 60 values (representing one hour, from 8:00-9:00) and I want to run average, maximums, minimums, and standard deviation for each set of 15. (I already have the...

How to calculate a random point inside a cube

I'm trying to figure out the math to find a random point inside a cube. I have something small but it can't take into account the rotation of the cube. Here are some images of my results. Here you can see the cube is rotated to some degree but when...

PySerial client unable to write data

I'm trying to write a python program which can communicate over a serial interface using PySerial module as follows: import serial if __name__ == '__main__': port = "/dev/tnt0" ser = serial.Serial(port, 38400) print print ser.isOpen() x = ser.write('hello') ser.close() print "Done!" But if I execute the above I get...

How can I resolve my variable's unexpected output?

I have a variable in django named optional_message. If I debug the variable then it says Swenskt but when I try to print the variable on my page the following comes out: (u'Swenskt',) and the variable can't be tested for its length etc. What should I do if I only...

Benefit of using os.mkdir vs os.system(“mkdir”)

Simple question that I can't find an answer to: Is there a benefit of using os.mkdir("somedir") over os.system("mkdir somedir") or, beyond code portability? Answers should apply to Python 2.7. Edit: the point was raised that a hard-coded directory versus a variable (possibly containing user-defined data) introduces the question of...

How to remove structure with python from this case?
How to remove "table" from HTML using python? I had case like this: paragraph = ''' <p>Lorem ipsum dolor sit amet, consectetur adipisicing elit. Quidem molestiae consequuntur officiis corporis sint.<br /><br /> <table> <tr> <td> text title </td> <td> text title 2 </td> </tr> </table> <p> lorem ipsum</p> ''' how...

Parsing Google Custom Search API for Elasticsearch Documents

After retrieving results from the Google Custom Search API and writing it to JSON, I want to parse that JSON to make valid Elasticsearch documents. You can configure a parent - child relationship for nested results. However, this relationship seems to not be inferred by the data structure itself. I've...

What is the difference between <> and == in python?

In [142]: (MON,TUE,WED,THR,FRI,SAT,SUN)<>range(7) Out[142]: True In [143]: (MON,TUE,WED,THR,FRI,SAT,SUN)==range(7) Out[143]: False ...

How to extract efficientely content from an xml with python?

I have the following xml: <?xml version="1.0" encoding="UTF-8" standalone="no"?><author id="user23"> <document><![CDATA["@username: That boner came at the wrong time ????" HELP I'M DYING ]]></document> <document><![CDATA[Ugh ]]></document> <document><![CDATA[YES !!!! WE GO FOR IT. ]]></document> <document><![CDATA[@username Shout out to me???? ]]></document> </author> What is the most efficient...

Parse text from a .txt file using csv module

I have an email that comes in everyday and the format of the email is always the same except some of the data is different. I wrote a VBA Macro that exports the email to a text file. Now that it is a text file I want to parse the...

monosubstitution cypher : decryption in python 2.7 list trouble

I'm currently coding a simple monosubsubstitution cypher in python. The encryption goes this way: first a key to encypher is produce this way def non_random_key(key_name): my_alphabet = [] for char in alphabet: my_alphabet.append(char) my_key_alphabet = list(key_name) for char in key_name: my_alphabet.remove(char) return my_key_alphabet + my_alphabet Then a message is encrypted...

Stopping list selection in Python 2.7

Imagine that I have an order list of tuples: s = [(0,-1), (1,0), (2,-1), (3,0), (4,0), (5,-1), (6,0), (7,-1)] Given a parameter X, I want to select all the tuples that have a first element equal or greater than X up to but not including the first tuple that has...

List of tuples from (a, all b) to (b, all a)

I am starting with a list of tuples (a,all b). I want to end with a list of tuples (b,all a). For example: FROM (a1,[b1,b2,b3]) (a2,[b2]) (a3,[b1,b2]) TO (b1,[a1,a3]) (b2[a1,a2,a3]) (b3,[a1] How do I do this using Python 2? Thank you for your help....

Import on class instanciation

I'm creating a module with several classes in it. My problem is that some of these classes need to import very specific modules that needs to be manually compiled or need specific hardware to work. There is no interest in importing every specific module up front, and as some modules...

from x(defined in program) import y(defined in program) python

I need some assitance since I really have no idea how I can fix this: x="test" y="test2" When I try to import y from x , it says that there is no file with the name "x" (from x import y) Is there any way to import test2 from test...

Python code not executing in order? MySQLdb UPDATE commits in unexpected order

I've got a Python 2.7 script I'm working on that retrieves rows from a MySQL table, loops through the data to process it, then is supposed to do the following things in this order: UPDATE the table rows we just got previously to set a locked value in each row...

Need workaround to treat float values as tuples when updating “list” of float values

I am finding errors with the last line of the for loop where I am trying to update the curve value to a list containing the curve value iterations. I get errors like "can only concatenate tuple (not "float) to tuple" and "tuple object has no attribute 'append'". Does anyone...

Adding time/duration from CSV file

I am trying to add time/duration values from a CSV file that I have but I have failed so far. Here's the sample csv that I'm trying to add up. Is getting this output possible? Output: I have been trying to add up the datetime but I always fail: finput...

Python split by comma delimiter and strip

I am trying to open a file in python in read mode then write striped and split data to an output file. I am unsure how to split and strip the same data. Do I need to create a different line? Do I need to write the data out first?...

Keep strings that occur N times or more

I have a list that is mylist = ['a', 'a', 'a', 'b', 'b', 'c', 'c', 'd'] And I used Counter from collections on this list to get the result: from collection import Counter counts = Counter(mylist) #Counter({'a': 3, 'c': 2, 'b': 2, 'd': 1}) Now I want to subset this...

creating a 3d array in python does not create array correctly

I wish to make a 3d array by appending each element to the array in a loop, but instead of getting a 3d array I just get a 1d array with more elements in it. I'm working in Python 2.7 I want to get labels = [1,34,u'te],[2,44,u've],[4,43,u'ht] My code so...

python - how to properly evaluate a value from a system command

I'm just learning python (using 2.7.8) and i'm trying to figure out what is the best way to evaluate the output of a system command. I've read to use subprocess. For example, I need to run this IF statment and evaluate for anything > 0, then process it. Example of...

lookbehind for start of string or a character

The command re.compile(ur"(?<=,| |^)(?:next to|near|beside|opp).+?(?=,|$)", re.IGNORECASE) throws a sre_constants.error: look-behind requires fixed-width pattern error in my program but regex101 shows it to be fine. What I'm trying to do here is to match landmarks from addresses (each address is in a separate string) like: "Opp foobar, foocity" --> Must match...

Python root logger messages not being logged via handler configured with fileConfig

The Problem: Given a logging config and a logger that employs that config, I see log messages from the script in which the log handler is configured, but not from the root logger, to which the same handler is assigned. Details: (Using Python 2.7) I have a module my_mod which...

How to find longest consistent increment in a python list?

possible_list = [] bigger_list = [] new_list= [0, 25, 2, 1, 14, 1, 14, 1, 4, 6, 6, 7, 0, 10, 11] for i in range(0,len(new_list)): # if the next index is not greater than the length of the list if (i + 1) < (len(new_list)): #if the current value...

Syntax Error (FROM) in Python, I do not want to use it as function but rather use it as to print something

I am trying to print out usernames from Instagram. When I type in print i.from.username, there will be syntax error because Python thinks that I am using from function, which i actually not. for i in a: print i.from.username Is there anyway to troubleshoot it? I tried using making a...

Identify that a string could be a datetime object

If I knew the format in which a string represents date-time information, then I can easily use datetime.datetime.strptime(s, fmt). However, without knowing the format of the string beforehand, would it be possible to determine whether a given string contains something that could be parsed as a datetime object with the...

Problems with tk entry and optionmenu widget in currency converter

I am currently having problems with my currency converter program in my python class. I am trying to convert an amount, the entry widget, from the starting currency, the first option menu, to the desired currency, the second option menu. I have spent hours reading the documentation, so I hope...