batch-file,ffmpeg , Batch ffmpeg and compress the files
Batch ffmpeg and compress the files
I am doing a bunch of conversions with
ffmpeg, where I need to watermark the content. I am using a batch file to run the
ffmpeg application, but I want to automate all of this.
for %%a in ("*.mp4*") do ffmpeg -i "%%a" -i logo.png -filter_complex overlay "newfiles\%%~na.mp4"
Source video files:
Source image files:
For every logo PNG image,
ffmpeg should be executed for all MP4 video files.
Output should be written to a new folder named
output_folder_ + name of the logo image, for example
And as soon as converting an entire folder like the logo_x output videos finished, the produced files should be compressed into a RAR archive with using best compression into a dropbox folder like
This way I could automate all the conversion and upload process.
In the end I would have in my
for %%g in ("*.png*") do (
for %%b in ("*.mp4*") do (
ffmpeg -i "%%b" -i %%g -filter_complex overlay "folder_prefix_%%~ng\%%~nb.mp4"
Here is my suggestion for the batch code:
md "%DropBoxFolder%" 2>nul
for %%I in (logo_*.png) do (
md "!OutputFolder!" 2>nul
for %%J in (*.mp4*) do (
ffmpeg.exe -i "%%~fJ" -i "%%~fI" -filter_complex overlay "!OutputFolder!\%%~nJ.mp4"
%ProgramFiles%\WinRAR\Rar.exe a -cfg- -ep1 -inul -m5 "%DropBoxFolder%\%FolderBaseName%_%%~nI" "!OutputFolder!\*"
rd /S /Q "!OutputFolder!"
Open a command prompt window and run there:
This results in getting help displayed for the used commands.
I need to save the variable in %%c temporarily which comes from a for loop. But when I try to do that, the content changes unexpectedly. Some space characters appear at the end of the string. The content of %%c is a.jpg by the way. echo %%ca REM prints a.jpga...
I am using ffmpeg to make a video from jpeg images using mjpeg codec. I use this command ffmpeg -i frame%d.jpg -c:v mjpeg -pix_fmt yuv420p -q:v 1 -y out.mp4 and I have this warning the yuvj420p was chosen instead. After reading about that pixel format, I found its deprecated to...
I have multiple versions of a program called Siemens NX. NX uses environmental variables for configuration. I need NX 10.0 to use a different set of environmental variables than my NX 7.5 which uses the system environmental variables. Therefore, I have written a batch file that setups the environmental variables...
While in cmd or making a batch file, I cannot use the command msg. When I try to use it, it returns the error msg is not recognized as an internal or external command, operable program or batch file." I'm pretty sure the error is that im missing a msg.exe...
I am trying to get a patch file to set a variable to the number of instances that are running for a particular executable but am getting this error: %%i was unexpected at this time Here is my code: for /f %%i in ('wmic process where name="chrome.exe" ^| find "chrome.exe"...
I need to perferm error handling (check ERRORLEVEL) on an operation involving the pipe operator, but instead of the script continuing with a non-zero ERRORLEVEL, it terminates immediately. How can I avoid this behavior? Consider the following example. (Note that is a simplified constructed example to illustrate the problem -...
I have some difficulties comparing two txt files with batch. I used the "findstr" function with many option matchings but none works (for example FINDSTR /I /V /B /G:file1.txt file2.txt). I have a first txt file as following: File1.txt Object 1 Argument 50 Object 2 Argument 10 Object 3 Argument...
I'm trying to convert a local .mp4 video to HLS using ffmpeg in an iOS app. I have integrated the ffmpeg wrapper using pods and generated all the segmented .ts files and the m3u8 file, but some of the .ts file segments are not listed in the .m3u8 playlist file...
So, I am programming in the batch script and I came across this issue. The following code will take yourwords.txt file and parse it. The existedWord variable will have the last word of the text file. So, everytime when I run this program it will only compare the user's input...
I am doing a bunch of conversions with ffmpeg, where I need to watermark the content. I am using a batch file to run the ffmpeg application, but I want to automate all of this. for %%a in ("*.mp4*") do ffmpeg -i "%%a" -i logo.png -filter_complex overlay "newfiles\%%~na.mp4" pause Source...
Is there a way to get the size on disk of a file like in the properties window: I have tried: (inside a batch file) echo %~z1 , for %i in (TestFile.txt) do echo %~zi , dir But they only return the size of the file(s). Is there any way...
I am working on an FFMPEG on node js. I'd like to retrieve the audio track from a video file using node js. I would also like to save such file but I can't figure out how. I though this line of code would help me : ffmpeg('/path/to/file.avi').noVideo(); I have...
I can't figure out why my command lines doesn't function. I tried subprocess.Popen()` function : `Popen('C:/Test/test.exe -scan "C:/Users/Vince/test.txt" "C:/Users/Vince/test.xml"', cwd='C:/Users/Vince/Working_Directory') But when I run a batch file from my Python program by using os.system("E:/test.bat"), it functions. Here is the content of my batch file: C: cd Users\Vince\Working_Directory C:\Test\test.exe -scan "C:\Users\Vince\test.txt"...
On Mac OS X 10.6.8, I converted a animated gif to a video file in wmv (a requested file format) by using ffmpeg -i File.gif -s 400x400 NewFile.wmv The video file played fine using VLC on Mac. The file can't be played on a Windows 7 machine using the Windows...
Here is my code Set objFSO = CreateObject("Scripting.FileSystemObject") a = "@echo off && " & _ "pushd ""\\xxxxx.local\cfs\Development\Docs\Baseline"" &&" & _ "cls &&" & _ "dir /b /a-d &&" & _ "popd" Set objShell = CreateObject("WScript.Shell").Exec("%comspec% /c " & a) execStdOut = objShell.StdOut.ReadAll() msgbox execStdOut Basically I am trying to...
I have a file called pictures.xml and it contains some pictures information like: <ResourcePicture Name="a.jpg"> <GeneratedPicture Name="b.jpg"/> <GeneratedPicture Name="c.jpg"/> </ResourcePicture> <ResourcePicture Name="z1.jpg"> <GeneratedPicture Name="z2.jpg"/> <GeneratedPicture Name="z3.jpg"/> <GeneratedPicture Name="z4.jpg"/> </ResourcePicture> What I want do do is to get each line in for loop and print the names of the pictures. Sample...
I need to write a batch file that will check if a variable contains specific value. I tried to do the following: If "%%a"=="%%a:%pattern%" ( echo Yes ) else ( echo No ) input example: %%a="bob binson" %patern%="binson" I never get Yes printed! can anyone please tell what i missed...
I have huge CSV file, which I want to know the total number of rows in which. Currently I am using something like this, which works perfectly, but it's slow: FIND /c ";" FILENAME.csv But I dunno if that's the fastest way to iterate through all lines in a CSV....
I have a somewhat complicated problem. I've downloaded an archived website from archive.org using Httrack and now I have thousands of subfolders and files I need to merge before I can rebuild it. I'm trying to write a batch file to solve the problem. But my search results never come...
I have a simple batch like this: SETLOCAL @echo off SET sourceRoot=d:\SVN\Project\Debug\General\ServicePortal\bin SET destinationRoute=d:\SVN\Project\Debug\General\Admin Project\ I can pass "d:\SVN\Project\Debug\General\Admin Project" through parameter to the bacth, but I don't know how can I cut the last folder "\Admin Project" and combine with "\ServicePortal\bin". Is it possible? Thx in advance...
I've got a batch file that executes a program along with sequential (numbered) macros and calls another batch file that monitors when it is finished before it begins the next iteration. I can't use Start /wait or other "ordering" commands when launching the program because it is started with a...
I'm trying to run a delete command on the result of an SQL command but only if it returns an error code of 0. Below is my code: SqlCmd command... REM if SqlCmd command is successful run the below if exist statement if errorlevel 0 ( REM if the file...
I have developed a batch script which checks for the version of the software installed on a machine and based on the version it picks up the correct version patch and installs it (runs) on the machine. However i am facing an issue where when i check for a particular...
I have to run the following command for hundreds of .docx files in a directory in a windows in order to convert them to .txt. java -jar tika-app-1.3.jar -t somedocfile.doc > converted.txt I was wondering if there is any automatic way such as writing a ".bat" file to do this....
The problem is as follows - I have a text file with an imagelist which contains the names of photos. The photos reside somewhere else on a hard drive. How do I delete/move those photos which names are in imagelist? Is there any batch routine?...
I have a python script that can be called in Windows as: python.exe do_my_work.py param > output.csv param is an input parameter. I also have a txt file called params.txt that contains many lines, each line is a value for the parameter of the python script: hello world this is...
So I have been playing around in batch trying to make a simple batch game. So now what have I done wrong? Here is the code: :promotions_sucessful cls if %division%==Bronze V ( set league=Bronze IV set lp=0 echo You have been promoted! del promotion.txt pause>nul goto menu ) if %division%==Bronze...
I have a command that I need to run in a Powershell script, the command is : ".\pacli DELETEUSER DESTUSER='"[email protected]`,com"' sessionid=333" | invoke-expression The comma (,) in here :[email protected],com is not a mistake, and that's what is giving me the hard time. I tried to escape the comma with `...
I'm using logstash 1.5.1 on a windows machine. I have to make a rest call, that delivers me JSON output. Therefore I'm using exec. The result is no json anymore :-(. The @message of this event will be the entire stdout of the command as one event. https://www.elastic.co/guide/en/logstash/current/plugins-inputs-exec.html My logstash...
I have these files that contain a name in the first line I wish to extract. All the methods I have approach either result in error or give me nothing. An example file can be found here: https://www.dropbox.com/s/0kcgj8vr3wii33s/FORS2.2011-10-23T23_59_20.355_out.fits?dl=0 I wish to extract "PN-G013.3+01.1", which lies on the first line (column...
Possibly a really dumb question: If a batch file runs an executable and the executable fails, does the batch file return the error code of the executable or does it return 0 for finishing its code? (or some other return code?) Relevance: I'm created tasks for a task scheduler to...
I am trying to convert a .bat file to python, almost everything is working fine, only the compression part is not working, I point out the flags and the path to the "rar.exe", but it's not working at all in the python version. What I need to correct to have...
So I have the following code to overlay a logo image over some videos. Its working great, the only problem I have is since my logo has the naming like "0001.logo.png", the output rar file doesnt set the right file extension, it sets the "myFolder_0001.logo" extension. Is it possible to...
I am using a make.bat file to compile my Fortran code. To compile using the ifort command, I first need to initialize the compiler by executing ifortvarsbat intel64 command where I had to setup the path variable. This works fine, however, the path keeps increasing in size and says command...
So I am making a program in batch and it requires a text file to be hashed then the hash has to be saved to a text file. I already have that part done but when it saves to the text file it saves like this f558e01b798b0390ab6206679a6926a7 C:\Users\computer\Desktop\tmpfile.txt So my...
My Problem is this: I want to replace every Special character such as "@" in file names. Example: old file: [email protected] new file: test_home.txt This should be done in a special chosen Folder including subfolders. The user should easily Change the Location (Folder). Thx guys Alright Well, I will give...
Is there any way howto create an infinite h264 stream from a video file (eg. mp4, avi, ...). I'd like to use ffmpeg to transcode avi file to h264 but there's no loop option for output.
I have a little problem with the next code @Echo off Title STARTING cls echo. echo Checking running services... echo. timeout /t 2 /nobreak >NUL tasklist /fi "imagename eq cmd.exe" /v | find /I /N "DATABASESERVER" >NUL if "%ERRORLEVEL%"=="1" ( cls echo. echo Database is not running, now will start!...
I've come around this macro in a assembly source file and I just can't figure out how it's working. So first I come around this function (hevc_deblock.h): cglobal hevc_v_loop_filter_chroma_8, 3, 5, 7, pix, stride, tc, pix0, r3stride sub pixq, 2 lea r3strideq, [3*strideq] mov pix0q, pixq add pixq, r3strideq TRANSPOSE4x8B_LOAD...
I wonder how do I show the location where the words were found in findstr? My Code: Set "LFiles=%temp%\Files\*.txt">nul 2>&1 Findstr /li /G:"List.txt" "%LFiles%">"Result.TxT" (for /F %%a in (List.txt) do ( Findstr /li /C:"%%a" "%LFiles%" > NUL if not errorlevel 1 echo %%a ))>"Result2.TxT" List: Disc Music Song Album Result:...
I know we could do this in VBS, PowerShell, etc. However, we do not want to do this with another language other than good ol' batch script. Have figured out the following: TASKKILL /F /IM "tomcat*" And this will forcibly kill/stop any persistent instances of Tomcat. Also, this would cover...
How do I display only the words found in the search instead of displaying the lines? My code: Findstr /li /G:"List.txt" "File.txt">"Result.TxT" List: Disc Music Song Album Result: DISC1312we7das67da 13dsdsa67dsahdsa7aMUSIC dsadsdfdsaSONG1223234235 The desired result: Disc Music Song ...
I'm trying to open multiple instances of cmd up which each run a ruby script at the same time. For background into the scripts, each of these ruby scripts run watir-webdriver and spawn new browser instances. All of this should happen instantaneously. Here's what I've tried: start cmd /k cd...
I'm trying to convert various video files from .mpeg to .ogg theora videos. This command works fine when I test it in its own program, but fails to run properly inside the program it was intended for. I don't understand what's breaking here. Adding a -vcodec flag causes other errors....
So I have created a file that works and when testing it without the if/else statement. When I put in this in a if statement it doesn't work at all though, is my syntax wrong or what? Thanks. @echo off set /p id= Folder Name: set /p yn= Subfolders? (y/n):...
I'm trying to write a batch file that when I run it will clone a repository locally. To open the git I have the following command: C:\Windows\System32\cmd.exe /c "%LOCALAPPDATA%\Atlassian\SourceTree\git_local\bin\sh.exe" --login -i However no matter what command I put in after this it never runs. I have read somewhere that this...
I'm trying to create a batch file that will ping a certain server and will only display the respond time. I don't mind if value is stored in a variable or not. If you do a normal ping you get: Reply from <hostname/server>: bytes=#byte_value time=#time_value TTL=#TTL_value And I only want:...
I am trying to open some website url links with a parameter in my browser. I made a batch file using this code : @echo off start "images" "www.images.com/1000/image.jpg" start "images" "www.images.com/1001/image.jpg" start "images" "www.images.com/1002/image.jpg" ... ... start "images" "www.images.com/5000/image.jpg" All I want is to create a For loop that...
I am trying to determine if some program has been installed and, if it has, open it. If the program has not been installed, an alternate program should open. For example, if Notepad++ has been installed, the script should open that; if not, Notepad should be opened instead. Any advice...