c,matlab,fopen,mex , Matlab Crahes upon fopen in Mex File

Matlab Crahes upon fopen in Mex File


Tag: c,matlab,fopen,mex

I have a little experience with Matlab, but am new to the mex environment.

What I am trying to do is to save some values I compute to a txt file in my C routine.

For the sake of simplicity I am using the example arrayProduct.c from MathWork's Create C Source File guide here to elaborate.

I modified the example code in the following way:

void arrayProduct(double x, double *y, double *z, mwSize n)
  mwSize i;

  /* multiply each element y by x */
  FILE *f = NULL;
  f = fopen("log_test.csv", "rb");
  for (i=0; i<n; i++) 
    z[i] = x * y[i];
    fprintf(f, "%g\n", z[i]);

So I added the declaration of f, the fopen, the fprintf and the fclose commands. I am using MS Visual Studio C++ 2013 Professional (C) as a compiler and the code compiles just fine. Through uncommenting all my changes and introducing them bit by bit again I was able to find out that Matlab crashes at the fopen command.

I wasn't able to find useful help here or elsewhere, so any suggestions are very welcome. Thanks very much in advance!

Kind Regards



Use w+ or r+ when using fopen, depending on what you want to do with the file and whethe you want to create it or simply open it.

From (http://www.tutorialspoint.com/c_standard_library/c_function_fopen.htm)


Program to reverse a string in C without declaring a char[]

I need to reverse a given string and display it without using the value At[index] notation , I tried the below program using pointers,but it does not print anything for the reverse string, Please help! int main() { char* name=malloc(256); printf("\nEnter string\n"); scanf("%s",name); printf("\nYou entered%s",name); int i,count; count=0; //find the...

Text justification C language

I have to solve a problem that involves left justification string length and leading zeros. I have the following table : BEGIN CLOSE CONCATENATE DELETE END INITIALIZE PRINT WRITE This is produced by a simple program. My problem is to find out how to convert it like that : It...

Reverse ^ operator for decryption

I'm trying to reverse the following code in order to provide a function which takes the buffer and decrypts it. void crypt_buffer(unsigned char *buffer, size_t size, char *key) { size_t i; int j; j = 0; for(i = 0; i < size; i++) { if(j >= KEY_SIZE) j = 0;...

C binary tree sort - extending it

I need some help in C Help me to extend the binary tree sort on C. I need to return a sorted array in sort function. here it is: #include <stdio.h> #include <stdlib.h> struct btreenode { struct btreenode *leftchild ; int data ; struct btreenode *rightchild ; } ; void...

scanf get multiple values at once

I need to get in one single shot different inputs from one single line. In particular I need to get a single char and then, depending on which char value I just read, it can be a string and an int or a string, an int and another string and...

How to access variables in the properties block of a Matlab System Object?

I am working on a simple System Object in Matlab/Simulink. It looks like this : classdef realtime_header_detectorSO < matlab.System & matlab.system.mixin.Propagates % correlateHeader % % This template includes the minimum set of functions required % to define a System object with discrete state. properties Header %nrOfBitsInPreviousStep=0; s=100; d=zeros(1,s); end properties...

How to read string until two consecutive spaces?

A well known function of the scanf() functions is that you can pass a format to scan input according to this format. For my case, I cannot seem to find a solution searching this and this documentation. I have a string (sInput) as the following: #something VAR1 this is a...

What does `strcpy(x+1, SEQX)` do?

I'm wondering what this syntax of strcpy() does in line 65 and 66: 24 #define SEQX "TTCATA" 25 #define SEQY "TGCTCGTA" 61 M = strlen(SEQX); 62 N = strlen(SEQY); 63 x = malloc(sizeof(char) * (M+2)); /* +2: leading blank, and trailing \0 */ 64 y = malloc(sizeof(char) * (N+2)); 65...

How to control C Macro Precedence

#define VAL1CHK 20 #define NUM 1 #define JOIN(A,B,C) A##B##C int x = JOIN(VAL,NUM,CHK); With above code my expectation was int x = 20; But i get compilation error as macro expands to int x = VALNUMCHK; // Which is undefined How to make it so that NUM is replaced first...

Loop through database table and compare user input

I am trying to loop through the rows in a MySql table and compare the data in a certain column to some user input using C. Currently my code looks like this: MYSQL *cxn = mysql_init(NULL); MYSQL_RES *result; unsigned int num_fields; unsigned int num_rows; char *query_string; MYSQL_ROW *row; if (mysql_real_connect(cxn,...

Set precision dynamically using sprintf

Using sprintf and the general syntax "%A.B" I can do this: double a = 0.0000005l; char myNumber[50]; sprintf(myNumber,"%.2lf",a); Can I set A and B dynamically in the format string?...

Is there Predefined-Macros define about byte order in armcc

Is there Predefined-Macros define about byte order in armcc. I am a novice on the armcc.and sorry for my English. In gcc these are macros: __BYTE_ORDER__ __ORDER_LITTLE_ENDIAN__ __ORDER_BIG_ENDIAN__ __ORDER_PDP_ENDIAN__ ... Now I have to use armcc, Is there same like these with armcc? Thank a lot. by the way,the armcc...

Plot multiple functions on one figure

I'm struggling to plot multiple functions on one figure. Here is the code that I have: syms t a; a=0.9514; F1=0.5*sqrt(3*t^2); F2=-0.28375*t^2+1.155*a*(t-a)+1; F3=1; E1=diff(F1,t); E2=diff(F2,t); E3=diff(F3,t); I want to plot E1, E2 and E3, each only within a certain range, to make a "composite" line. I've tried plotting with ezplot...

solve symbolic system of equations inside an array

sorry if it already has a answer..i tried other links but it didn't understand i have 2 1*63 array .landa and v. each of their members are syms. and each v member is a function of all landa members.i have already calculated v members and they are all symbolic equations...

Counting bytes received by posix read()

I get confused with one line of code: temp_uart_count = read(VCOM, temp_uart_data, 4096); I found more about read function at http://linux.die.net/man/3/read, but if everything is okay it returns 0, so how we can get num of bytes received from that? temp_uart_count is used to count how much bytes we received...

Plotting random signal on circle

I have some random signal (for example sin signal) with the time scale. t=0:0.1:2*pi y=sin(t) plot(t,y) Now I want to draw this signal on this circle. So the time vector actually becomes an envelope of the circle. Envelope of the circle represents "y = 0" in cartesian coordinate system. Here...

getchar() not working in c

getchar() is not working in the below program, can anyone help me to solve this out. I tried scanf() function in place of getchar() then also it is not working. I am not able to figure out the root cause of the issue, can anyone please help me. #include<stdio.h> int...

Why black surf from this Matlab command?

Code tfr = abs ( tfr ); [row_size, column_size] = size(tfr); tfr = tfr(1:round(row_size/2), 1:row_size); surf(tfr); view(2); I get in R2014b of OSX 10.10.3 Yosemite but rotating around shows that the cells should not be black Why is the output black? I wonder if this is a hardware problem or...

Does realloc() invalidate all pointers?

Note, this question is not asking if realloc() invalidates pointers within the original block, but if it invalidates all the other pointers. I'm new to C, and am a bit confused about the nature of realloc(), specifically if it moves any other memory. For example: void* ptr1 = malloc(2); void*...

Interpolation inside a matrix. Matlab

I have a matrix looks like: 0 0 0 0 0 1 0 0 0 0 0 2 0 0 0 0 0 2 0 0 0 0 0 1 0 1 0 0 0 1 0 4 0 0 0 0 0 3 0 0 6 0 0 4...

Passing int using char pointer in C

I'm trying to figure out how to pass an int using a char pointer. It fails once the int value is too large for the char. This is what I'm trying to figure out: char *args[5]; int i = 20; /*some other code/assignments*/ args[2] = (char *)&i; execv(path, args); How...

Disadvantages of calling realloc in a loop

I'm trying to implement some math algorithms in C on Windows 7, and I need to repeatedly increase size of my array. Sometimes it fails because realloc can't allocate memory. But if I allocate a lot of memory at once in the beginning it works fine. Is it a problem...

C++ / C #define macro calculation

Suppose I have #define DETUNE1 sqrt(7)-sqrt(5) #define DETUNE2 sqrt(11)-sqrt(7) And I call these multiple times in my program. Are DETUNE1 and DETUNE2 calculated every time it is called? Thanks. Please don't downvote this, I really want to know and a search didn't turn up anything definite. ...

How to normalise polynomial coefficients in a fraction?

I have the following code: syms z Gc=1.582*(1-0.3679*z^-1)/(1+.418*z^-1); Ghp=.3679*(z^-1)*(1+.718*z^-1)/((1-z^-1)*(1-.3679*z^-1)); T=(Gc*Ghp)/(1+Gc*Ghp); clipboard('copy', latex(simplifyFraction(T))); Which results in following for T: How can I normalise coefficients? I.e. I want the z2 in denominator and z in numerator to have the coefficient of 1. Is there any function in Matlab to do so?...

Segmentation fault with generating an RSA and saving in ASN.1/DER?

#include <string.h> #include <openssl/aes.h> #include <openssl/rand.h> #include <openssl/bio.h> #include <openssl/rsa.h> #include <openssl/evp.h> #include <openssl/pem.h> #define RSA_LEN 2048 #define RSA_FACTOR 65537 int genRSA2048(unsigned char **pub,unsigned int *pub_l,unsigned char **priv,unsigned int *priv_l){ RSA *pRSA = NULL; pRSA = RSA_generate_key(RSA_LEN,RSA_FACTOR,NULL,NULL); if (pRSA){ pub_l = malloc(sizeof(pub_l)); *pub_l = i2d_RSAPublicKey(pRSA,pub); priv_l = malloc(sizeof(priv_l));...

Infinite loop with fread

I'm trying to allocate an array 64 bytes in size and then loop over the array indexes to put a read a byte each from the inputfile. but when I don't malloc() the array indexes, the loop stays in index0 (so each time it loops it replaces the content in...

matlab plots as movie with legend

i have a question regarding legend for movies. This is my code: fig = figure(); for i = 1: 70000 plot(signal1) hold on; plot([i,i],[-5,5]) plot(signal2,'r') hold off; title('\fontsize{14} my data'); legend('signal1','signal2'); axis tight; f(i) = getframe(fig); end The legend shows the same colors for the first two things I plot....

Reading all the files in sequence in MATLAB

I am trying to read all the images in the folder in MATLAB using this code flst=dir(str_Expfold); But it shows me output like this. which is not the sequence as i want. Can anyone please tell me how can i read all of them in sequence? for giving downmark, please...

Segmentation Fault if I don't say int i=0

void removeVowels(char* array){ int i,j,v; i=0; char vowel[]={'a','e','i','o','u'}; while(array[i]!='\0') { for(v=0;v<5;v++) { if (array[i]==vowel[v]) { j=i; while(array[j]!='\0') { array[j]=array[j+1]; j++; } i--; break; } } i++; } } in function removeVowels() if I don't include i=0; and just say int i; why does it give segmentation fault? Isn't it automatically...

How does this code print odd and even?

#define MACRO(num, str) {\ printf("%d", num);\ printf(" is");\ printf(" %s number", str);\ printf("\n");\ } int main(void) { int num; printf("Enter a number: "); scanf("%d", &num); if (num & 1) { MACRO(num, "Odd"); } else { MACRO(num, "Even"); } return 0; } Please explain the above code (if/else condition and how...

C programming - Confusion regarding curly braces

The following code is for replacing multiple consecutive spaces into 1 space. Although I manage to do it, I am confused in the use of curly braces. This one is actually running fine: #include <stdio.h> #include <stdlib.h> int main() { int ch, lastch; lastch = 'a'; while((ch = getchar())!= EOF)...

Array breaking in Pebble C

I'm trying to create a simple dice-rolling application in Pebble using C on CloudPebble. I have an array of different die sizes you can scroll through using Up/Down, and you roll (currently just generate a random number, it'll get fancier later) using the middle button. There's also a label at...

How does ((a++,b)) work? [duplicate]

This question already has an answer here: What does the comma operator `,` do in C? 8 answers In the below block of code, I am trying to understand how the line return reverse((i++, i)) is working. #include <stdio.h> void reverse(int i); int main() { reverse(1); } void reverse(int...

How to switch Matlab plot tick labels to scientific form?

I have a semilogarithmic plot which works so far with semilogx. Now I would like to change the tick labels. Now it says 10^8 10^9 ... 10^13, but I would like to see 1e8, 1e9, ... 1e13 on the x-axis. How can I change that? Cheers Manuel...

Is post-increment operator guaranteed to run instantly?

Let's say I have the following code: int i = 0; func(i++, i++); The increment is happening right after returning the value? Is it guaranteed that the first argument will be 0, and the second argument will be 1?...

CallXXXMethod undefined using JNI in C

So I've tried to use the JNI interface to call Java methods from C. Calling static methods is no problem, but I get stuck when I want to call a method on an object. The code is as follows: #include <stdio.h> #include <string.h> #include <jni.h> int main() { JavaVMOption options[1];...

Giving a string variable as a filename in matlab

I am using the below mentioned code to get the file names of images according to their id's from images_1 text file as strings and use them to read the images from their directory image_count=1; for image_count=1:6 file=fopen('D:\Academics\New folder\CUB_200_2011\images_1.txt','r'); C = textscan(file, '%s'); original_image=imread('D:\Academics\New folder\CUB_200_2011\images\%s','C{1}{2*(image_count)}'); imshow(original_image) end I am able...

Animate through multiple 2D Matlab plots

I have multiple 2D line plots in Matlab (they represent some wave moving through space). Each plot represents the wave at some time t. I want to animate through these plots (i.e. show the first plot for a fraction of a second, then show the next one, and the next,...

Saving images with more than 8 bits per pixel in matlab

I need to save a set of pre-processing images in matlab, resulting in grayscale images. The problem is the fact that these pre-processed images have pixel values higher than 255. If I save them with imwrite() as, for instance, .PNG files, does matlab normalize the values to be in [0,255]...

thicken an object of image to a curve in matlab

I have a labeled matrix containing two objects. How can I thicken an object to a curve? Actually I have the following image: and I want this: Each pixel of the resulting curve is the median of each column. But if you have another idea, it is acceptable, because I...

VS2012 Identifer not found when part of static lib

Using VS2012 C/C++: I created and linked a static lib called "libtools" to my project. Calls to functions in the libtools lib worked as expected. I created and linked a second static lib called "shunt" to my project. But when I incorporate a call to a function in shunt, I...

Galois LFSR - how to specify the output bit number

I am trying to understand how change the galois LFSR code to be able to specify the output bit number as a parameter for the function mentioned below. I mean I need to return not the last bit of LFSR as output bit, but any bit of the LFSR (...

Matlab - Multiply specific entries by a scalar in multidimensional matrix

I'm having problems multiplying specific values within my multidimensional matrix by a scalar. My matrix has the following dimension: size(comDatabe) = 5 10 3 397 10 The third dimension is an x-y-z coordinate frame. Something went wrong and now my y-axis is defined upside down for one subject (#8 out...

Connecting two binary objects in matlab

I have a binary matrix containing several binary objects and I want to bridge between them. Actually I have the following picture: And the result has to be like this: Is there any function or a shortcut way, other than loops, for this problem?...

xcorr function with impulse response

I'm trying to design a Wiener filter in Matlab for a deconvolution problem but I'm having a lot of problems. I have a gaussian white noise process with a variance of 1.2 and a impulse response which has length two. Its values are g(0) = 5 and g(1) = 4....

what does ellipsis mean in a Matlab function's argument list?

What is the ellipsis for in this Matlab statement? frame = insertObjectAnnotation(frame, 'rectangle', ... bboxes, labels); ...I could not find in their online doc....

How to force my output data in a inputdlg on Matlab be a double?

I'm currently using a MATLAB to work and I need some help: I need to convert my output data (variable: units) be a double instead of a cell because I must perform a sum: units = inputdlg(question,title); sum = units + i; I've tried this code also but didn't solve...

function wait to execute

In Matlab functions can be started at events,but occasionally, like with the resize function, the events are called in rapid order and the function is called many times in succession, which can cause weird behavior and lag. Is there a way to have it listen for the event but only...

Matlab — SVM — All Majority Class Predictions with Same Score and AUC = .50

I'm having a weird problem in training an SVM with an RBF kernel in Matlab. The issue is that, when doing a grid search, using 10-fold cross-validation, for the C and Sigma values I always get AUC values equal to approximately .50 (varying between .48 and .54 depending) -- I...

Does strlen() always correctly report the number of char's in a pointer initialized string?

As long as I use the char and not some wchar_t type to declare a string will strlen() correctly report the number of chars in the string or are there some very specific cases I need to be aware of? Here is an example: char *something = "Report all my...