c#,regex , Regex that allow void fractional part of number


Regex that allow void fractional part of number

Question:

Tag: c#,regex

@"[+-]?\d+(\.\d+)?" -this is a regex I have wrote for numbers it allows [+-] minus before the number digits before and digits after the point

the question is how to change this to allow "not finished" values so that input of "5." - is fine too ?


Answer:

Just get the dot outside of the captruing group and then make it as optional.

@"[+-]?\d+\.?\d*" 

Use anchors if necessary.

@"^[+-]?\d+\.?\d*$" 

Related:


C# Code design / Seperate classes for each TabControl


c#,oop,architecture,software-design,code-design
My main problem is that my tool grows and grows and I start loosing the focus on the different parts of my code. The main-Form got a docked tabControl at fullsize. I got 5 different tabs with for really different functions. So I can say my tool is splitted into...

Please can someone help me understand the exec method for regular expressions?


javascript,regex
The best place I have found for the exec method is Eloquent Javascript Chapter 9: "Regular expressions also have an exec (execute) method that will return null if no match was found and return an object with information about the match otherwise. An object returned from exec has an index...

Aligning StackPanel to top-center in Canvas


c#,wpf,xaml,canvas
I'm trying to create an application which is supposed to measure quick reaction performance of it's user. The application starts up in full-screen mode and resizes it's elements accordingly to the screen resolution. The project was strongly inspired by training_aim_csgo2 map. It's mostly done, but here is the problem: I...

How to write RegEx for inserting line break for line length more than 30 characters?


regex
I am using a text editor which lets use regular expression to find / replace text. I have a large text file. I want to insert new line in each lines which are more than 30 characters. I want the line to break after 30th character (doesnt matter if a...

Regular Expression for whole world


regex,c#-4.0,vb6
First of all, I use C# 4.0 to parse the code of a VB6 application. I have some old VB6 code and about 500+ copies of it. And I use a regular expression to grab all kinds of global variables from the code. The code is described as "Yuck" and...

match line break except line begin with spcific word or blank line


regex,notepad++
If I have text that the line breaks is broken: Chapter 1 Lorem ipsum dolor sit amet, consectetur adipisci ng elit, sed do eiusmod tempor incididunt ut la bore et dolore magna aliqua. Ut enim ad minim ve niam, quis nostrud exercitation ullamco labo ris nisi ut aliquip ex ea...

Access manager information from Active Directory


c#,asp.net,active-directory
Attach is the picture of active directory, which i got from my IT department. Now i want to get the manager information in C#. NOTE: I am able to get all information of user but there isn't any key of manager, but IT department just gave me above attached...

Get object by attribute value [duplicate]


c#,reflection,custom-attributes,spring.net
This question already has an answer here: How enumerate all classes with custom class attribute? 4 answers I have a set of classes which implement a common interface and are annotated with a business domain attribute. By design, each class is annotated with different parametrization [Foo(Bar=1)] public class EntityA...

Is it possible to concactenate a DataBound value with a constant string in XAML DataBinding?


c#,xaml,windows-phone
To bind a value to a TextBlock we use the following syntax to display an <ItemName> property of a bounded object. <TextBlock Text="{Binding Path=ItemName}" /> But is there a syntax to use the above tag to concatenate the constant string 'Item' with the databounded property, in order display something like:...

SQL Server / C# : Filter for System.Date - results only entries at 00:00:00


c#,asp.net,sql-server,date,gridview-sorting
I have a connected SQL Server database in Visual Studio and am displaying its content in a grid. I created a dropdown menu with the column names as selectable options and a text field to filter for specific content, e.g., DropDown = "Start" - Textfield = 14.03.2015 = Filter Column...

Convert contents of an XmlNodeList to a new XmlDocument without looping


c#,xml,xpath,xmldocument,xmlnodelist
I have Xml that I filter using XPath (a query similar to this): XmlNodeList allItems = xDoc.SelectNodes("//Person[not(PersonID = following::Person/PersonID)]"); This filters all duplicates from my original Persons Xml. I want to create a new XmlDocument instance from the XmlNodeList generated above. At the minute, the only way I can see...

how can I add a column to IQueryable object and modify its values


c#,.net,linq,grid,devexpress
var packs = from r in new XPQuery<Roll>(session) select new { Number = r.number Selection = new bool() }; gcPack.DataSource = packs; I want to add another column to my grid control with: Selection = new bool(). It will be added to the grid but I can't change its...

C# PCL HMACSHAX with BouncyCastle-PCL


c#,bouncycastle,portable-class-library
I want to implement this logic in portable C# class: static JsonWebToken() { HashAlgorithms = new Dictionary<JwtHashAlgorithm, Func<byte[], byte[], byte[]>> { { JwtHashAlgorithm.HS256, (key, value) => { using (var sha = new HMACSHA256(key)) { return sha.ComputeHash(value); } } }, { JwtHashAlgorithm.HS384, (key, value) => { using (var sha = new...

Why is the task is not cancelled when I call CancellationTokenSource's Cancel method in async method?


c#,asynchronous,task,cancellationtokensource,cancellation-token
I created a small wrapper around CancellationToken and CancellationTokenSource. The problem I have is that the CancelAsync method of CancellationHelper doesn't work as expected. I'm experiencing the problem with the ItShouldThrowAExceptionButStallsInstead method. To cancel the running task, it calls await coordinator.CancelAsync();, but the task is not cancelled actually and doesn't...

Memory consumption when chaining string methods


c#,string,immutability,method-chaining
I know that string in C# is an immutable type. Is it true that when you chain string functions, every function instantiates a new string? If it is true, what is the best practice to do too many manipulations on a string using chaining methods?...

How to Customize Visual Studio Setup


c#,visual-studio,setup-project
I have created a video chat application in c#. Now I wan to make a setup of it. I have created a setup using Visual studio's setup project but my client told me to customize the setup progress bar styles and other properties. i dont know how to do it....

Finding embeded xpaths in a String


java,regex
I have a string where I have the user should be able to specify xpaths that will be evaluated at runtime. I was thinking about having a the following way to specify it. String = "Hi my name is (/message/user) how can i help you with (/message/message) "; How can...

Validate a field only if it is populated


c#,wpf,idataerrorinfo
I am having a problem with validating phone numbers. In our system we have two phone numbers which you can store. The problem I am having is that these are optional fields. So I want it to validate the phone number IF and only IF the user has tried to...

Visual Studio Assembly force-installs Target Framework


c#,.net,visual-studio-2013,.net-framework-version
I have this Assembly targeted at .NET 3.5. The code will work on later versions as well, but I like this to work on Windows XP. I mean, .NET is backwards compatible, right? I can run apps for .NET 3.5 on Windows 8.1. However, when I run my own assembly,...

while Inherit style in WPF it affect parent style


c#,xaml,styles,wpf-controls
In WPF i have a style for the control like below, <Style TargetType="local:CustomControl"> <Setter Property="Background" Value="Transparent" /> <Setter Property="BorderBrush" Value="Gray" /> <Setter Property="BorderThickness" Value="0,0,0,1" /> <Setter Property="Padding" Value="3,0,3,0" /> <Setter Property="IsTabStop" Value="False" /> <Setter Property="VerticalContentAlignment" Value="Center" /> </Style> Now i need to override customcontrol border for some other place like...

Update list of items in c#


c#,linq,list,updates
I would like to know if you can suggest me an efficient way to update a list of items in c#. Here is a generic example: If CurrentList is [ {Id: 154, Name: "George", Salary: 10 000} {Id: 233, Name: "Alice", Salary: 10 000}] And NewList is [ {Id: 154,...

Catch concurrency exception in EF6 to change message to be more user friendly


c#,asp.net,.net,entity-framework,entity-framework-6
I am using EF6.1 and i would like to change the message to a more system specific message when the below exception is thrown. Store update, insert, or delete statement affected an unexpected number of rows (0) Now, my problem is i cannot seem to catch the exception? I have...

Load XML to list using LINQ [duplicate]


c#,xml,linq
This question already has an answer here: XDocument to List of object 1 answer I have following XML: <?xml version="1.0" encoding="utf-8"?> <start> <Current CurrentID="5"> <GeoLocations> <GeoLocation id="1" x="78492.61" y="-80973.03" z="-4403.297"/> <GeoLocation id="2" x="78323.57" y="-81994.98" z="-4385.707"/> <GeoLocation id="3" x="78250.57" y="-81994.98" z="-4385.707"/> </GeoLocations> <Vendors> <Vendor id = "1" x="123456" y="456789" z="0234324"/>...

regex - Match filename with or without extension


regex,logstash-grok
Need a regex pattern to match all of the following: hello hello. hello.cc I tried \b\w+\.?\w+?\b, but this doesn't match "hello." (the second string mentioned above)....

Difference between application and module pipelines in Nancy?


c#,asp.net,nancy
I have seen in the documentation of Nancy, sometimes these two are referred distinctively. And also is there a difference in the Before/After hooks of these two pipelines?...

Identify that a string could be a datetime object


python,regex,algorithm,python-2.7,datetime
If I knew the format in which a string represents date-time information, then I can easily use datetime.datetime.strptime(s, fmt). However, without knowing the format of the string beforehand, would it be possible to determine whether a given string contains something that could be parsed as a datetime object with the...

Regex to remove `.` from a sub-string enclosed in square brackets


c#,.net,regex,string,replace
I have this regex in C#: \[.+?\] This regex extracts the sub-strings enclosed between square brackets. But before doing that I want to remove . inside these sub-strings. For example, the string hello,[how are yo.u?]There are [300.2] billion stars in [Milkyw.?ay]. should become hello,[how are you?]There are [3002] billion stars...

How can I determine if an object of anonymous type is empty?


c#,.net
I am sure the answer to this is quite simple but I am trying to write an if statement (C# 5.0) to determine whether or not an anonymous type is empty or not. Here is a simplified version of my code: public void DoSomething(object attributes) { // This is the...

Marshal struct in struct from c# to c++


c#,c++,marshalling
I have the following structures in C# and C++. C++: struct TestA { char* iu; }; struct TestB { int cycle1; int cycle2; }; struct MainStruct { TestA test; TestB test2; }; C#: [StructLayout(LayoutKind.Sequential, CharSet=CharSet.Ansi, Pack = 1)] internal struct TestA { [MarshalAs(UnmanagedType.ByValTStr, SizeConst = 36)] private string iu; public...

check if file is image


c#,asp.net,asp.net-mvc
I want to check if file is image. and then you will see a link where you can see the image. But the link only has to appear if file is link. I try it like this: if (!String.IsNullOrEmpty(item.FileName)) { var file = item.FileName; string[] formats = new string[] {...

How to send Ctrl+S through SendKeys.Send() method to save a file(save as dialog)


c#,.net,windows,sendkeys
I need to save a file which is in an External application using SendKeys.Send() method. The keys needed to be sent are Ctrl+S. I wrote the below code, but its not working: SendKeys.SendWait("^%s?"); // to get the Save As dialog Thread.Sleep(5000); SetForegroundWindow(FindWindow(null, "Save As")); Thread.Sleep(5000); SendKeys.SendWait("xyz"); // Sending FileName ...

How do I provide a collection of elements to a custom attached property?


c#,wpf,binding
I found a few examples online, and a few questions and answers here, but I just can't get it to work. I need a custom attached property that can take one or more target elements. For example... <ListView> <dd:MyDragDrop.DropBorders> <Binding ElementName="brdOne"/> <Binding ElementName="brdTwo"/> <Binding ElementName="brdThree"/> </dd:MyDragDrop.DropBorders> </ListView> I've also had...

Convert Date Time to IST


c#
I want to convert the date time to "Indian Standard Time", so i used the following code :- public static TimeZoneInfo INDIAN_ZONE = TimeZoneInfo.FindSystemTimeZoneById("Indian Standard Time"); writer.WriteLine("{0} {1}", indianTime.ToLongTimeString(), indianTime.ToLongDateString()); The above code gives me error :- System.TimeZoneNotFoundException: The time zone ID 'Indian Standard Time' was not found on the...

Get number from string


regex
I am trying to get the enclosed number between two slashes in a URL using regex. The code regex I have is not working, I am fairly new to regex and don't really understand it. The regex: http:\/\/?www\.?example\.com\/g\/(^\d$)\/\w The URL: http://www.example.com/g/1337/Game-Title Trying to get the "1337", which is the PlaceId....

How to return result while applying Command query separation (CQS)


c#,design-patterns,cqrs,command-query-separation
I am separating my query and command on service side like this: public class ProductCommandService{ void AddProduct(Product product); } public interface ProductQueryService{ Product GetProduct(Guid id); Product[] GetAllProducts(); } Command Query Separation accepts that a method should change state or return a result. There is no problem. public class ProductController: ApiController{...

Index was out of range. Must be non-negative or less than size of collection [duplicate]


c#
This question already has an answer here: What is an “index out of range” exception, and how do I fix it? [duplicate] 1 answer Trying to run a delete application in C#. If there is more than 10 files in a directory, delete the oldest file, and iterate again....

deployment of a site asp.net and iis


c#,asp.net,iis
I know this is for some of you a stupid question but for me is a real problem. I have never deployed a site before What i have done so far: 1) publish the site from visual studio to a folder. 2) added to iis for testing everything works great...

Multiple Threads searching on same folder at same time


c#,multithreading,file-search
Currently I have a .txt file of about 170,000 jpg file names and I read them all into a List (fileNames). I want to search ONE folder (this folder has sub-folders) to check if each file in fileNames exists in this folder and if it does, copy it to a...

C# XML: System.InvalidOperationException


c#,xml
I have been learning C#'s XML with a project however I keep getting the InvalidOperationException. I have put the code below XmlTextWriter writer = new XmlTextWriter(path, System.Text.Encoding.UTF8); writer.WriteStartDocument(true); writer.Formatting = Formatting.Indented; writer.Indentation = 4; writer.WriteStartElement("User Info"); writer.WriteStartElement("Name"); writer.WriteString(userName); writer.WriteEndElement(); writer.WriteStartElement("Tutor Name"); writer.WriteString(tutorName); writer.WriteEndElement();...

System.net.http.formatting causing issues with Newtonsoft.json


c#,asp.net,asp.net-mvc,json.net
My Windows service is in the same solution as a MVC project. The MVC project uses a reference to SignalR Client which requires Newtonsoft.Json v6 + the Windows service uses System.Net.Http.Formatting, which requires Newtonsoft.Json version 4.5.0.0. I assumed this would not be a problem, as I could just use a...

PHP Regular Expressions Counting starting consonants in a string


php,regex
I need to find out how many starting consonants a word has. The number is used later in the program. The code below does work, I am wondering if it is possible to do this with a regular expression. $mystring ="SomeStringExample"; $mystring2 =("bcdfghjklmnpqrstvwxyzABCDFGHJKLMNPQRSTWVXYZ"); $var = strspn($mystring, $mystring2); Using a regular...

Get all prices with $ from string into an array in Javascript


javascript,regex,currency
var string = 'Our Prices are $355.00 and $550, down form $999.00'; How can I get those 3 prices into an array?...

Regex that allow void fractional part of number


c#,regex
@"[+-]?\d+(\.\d+)?" -this is a regex I have wrote for numbers it allows [+-] minus before the number digits before and digits after the point the question is how to change this to allow "not finished" values so that input of "5." - is fine too ?...

Collect strings after a foreach loop


c#,xml,foreach
Is it possible to collect the strings after a foreach loop? For example: StringCollection col = new StringCollection(); XmlNodeList skillNameNodeList=SkillXML.GetElementsByTagName("name"); foreach (XmlNode skillNameNode in skillNameNodeList) { skillsName=skillNameNode.Attributes["value"].Value; } col.Add(skillsName); //Return System.Collections.Specialized.StringCollection I want to collect each skillsName and put them in a collection or a list so that I can...

How to declare var datatype in public scope in c#?


c#,linq
I write simple query with linq to sql : var query = (from p in behzad.GAPERTitles select new { p.id, p.gaptitle }).ToArray(); up code into the c# windows application ,windows form load event,and i want use up result into the button click event in this scope: private void button1_Click(object sender,...

Foreign key in C#


c#,sql,sql-server,database
I have two tables, A and B, in a dataset in SQL Server; I have created a connection to the dataset in a c# project in visual studio. How can I create a foreign key ( A is the parent) between my two tables ? I want to create the...

Reg ex matching a word


regex
I need to match only first two files, out of four files listed below: ABD_DEF_GHIJ_20150611 ABD_DEF_GHIJ ABD_DEF_GHIJ_FX_20150611 ABD_DEF_GHIJ_FX I am using reg ex - ABD_DEF_GHIJ(_\d{8}|\b) and it's working fine. I would like to know if my solution is ok or there is any better alternate solution....