ssh,raspberry-pi,samba , Accessing Samba share through Raspberry Pi SSH


Accessing Samba share through Raspberry Pi SSH

Question:

Tag: ssh,raspberry-pi,samba

I have a raspberry Pi at home that I can access over the internet using SSH (using only key authentication), which is behind a TP-Link router. This router has a hard drive attached to it, which I can access as a samba share locally using the router's IP address. I would like to access this hard drive when I'm away from home, but I don't want to expose my samba share to the internet (needless to say why). Is there a way I can access it securely through my Raspberry Pi's SSH server ?


Answer:

I am not 100% sure, if this is what you want. But what you can do:

  1. Mount your router drive via samba to your RPi's mount point.
  2. Access your PRi via sshfs.

http://en.wikipedia.org/wiki/SSHFS

Works for me like a charm. I found that using sshfs is much easier than nfs or samba under Linux. This solution definitely works when you access your RPi under Linux. Windows -> RPi, or Mac -> RPi.... perhaps, I don't know. I think there are sshfs solutions, but I don't know how stable or usable they are.


Related:


Creating a Virtual Machine on Bluemix, is giving an error while importing ssh key [closed]


ssh,openstack,bluemix
I am following the steps to create Virtual Machine on Bluemix following the steps as below. https://www.ng.bluemix.net/docs/starters/index-gentopic4.html#vm_ssh_key I am blocked when I am trying to configure a SSH key. I am using an existing key pair which I use with my other machines. I get an error "Keypair data is...

GPS App compile errors


c++,linux,gps,raspberry-pi,gpsd
I am working on a GPS application on the Raspberry pi. I have just installed GPSD by running sudo apt-get install gpsd gpsd-clients. I do get data from my GPS module when I run sudo gpsd /dev/ttyAMA0 -F /var/run/gpsd.sock. My issue resides when I try to make my own GPS...

Capture SSH Response to variable


c#,c#-4.0,ssh,ssh.net
I am currently trying to "talk" to a router using SSH commands via C#. I am using the SSH.net model. public void connectSSH(string hostName, string username, string password) { using (var client = new SshClient(hostName, username, password)) { client.Connect(); client.RunCommand(CommandList.showEnvironment()); client.Disconnect(); } } This is the code I have so...

git ssh doesn't work


git,ssh
I have done what the document said, and when I type ssh -T [email protected], it will show Warning: Permanently added the RSA host key for IP address '[192.30.252.149]:443 ' to the list of known hosts. Hi fifiteen82726! You've successfully authenticated, but GitHub does not provide shell access. However, when I...

Jumbled out put of RFID Tags


python,raspberry-pi,raspbian
I am working on a project, in which I have to interface multiple RFID Readers (I'm Using EM 18, With Serial out) with Raspberry Pi. I'm using an USB to TTL Converter to connect EM 18 to Raspberry Pi. I've connected two RFID Readers using USB to TTL Adapter. This...

View EC2 Instance Server Files in AWS Console


amazon-web-services,ssh,amazon-ec2
Is it possible to browse server files (.php, etc.) inside the AWS Console (in the browser) and not via a SSH or FTP client? For example; view files just like in CPanel on a regular web host. I am working on a EC2 instance of a Debian OS that was...

SSH remote command


ssh,command,remote-access
I have a strange SSH problem. If I run this ssh [email protected] 'md5sum file.txt' I get back the result as expected, but if I run this ssh [email protected] 'cat file.txt' then it just sits there....

How deploy an large number iBeacons


bluetooth,raspberry-pi,bluetooth-lowenergy,uuid,ibeacon
I want deploy a large number of iBeacons with the same UUID because we can't access dynamically to the UUID of the beacons detected. What is the limit number of the maximum Beacons with the same UUID ? I found some discussions with a number of 65000 approximately, is it...

Error in executing a Jar file in remote machine


java,ssh,jar
I am trying to executing a jar file which is present in remote machine. When I execute below command from my local machine I get error: ssh -i /root/.ssh/pem_file [email protected][host_ip]:/home/user/folder1/java -cp jar1.jar -a option1 -e [email protected] -f TextFile.txt /home/user/folder1/ is the location where jar file is present on remote machine.The...

How do I SSH into EC2 with .pub?


amazon-web-services,ssh,amazon-ec2
When I create a new Elastic Beanstalk environment it asked me if wanted to create a new keypair. I say yes, and it created two file in my .ssh folder locally called app and app.pub. Normally to ssh into an instance I use a app.pem file. i.e ssh -i app.pem...

Python subprocess throws [Errno 2] No such file or directory, error generated only when it on a remote host


python,linux,ssh,subprocess,python-2.6
I'm running python 2.6. I'm getting the subprocess throws [Errno 2] No such file or directory only when I run the script via ssh. For example, if I run the script manually on the machine, there are no errors, but if I do ssh hostname script.py --host hostname it generates...

SSH Connection to MySQL


java,mysql,jdbc,ssh
I have hit an issue and I am unsure as to where it is going wrong. I am establishing an SSH connection to my remote server and from there I am trying to access a MySQL Database. The SSH connection connects properly however, when attempting to access the MySQL db...

Can you create a project on GitLab using ssh?


ssh,gitlab
I have an account with gitlab.com. I am trying to automate some of the steps of setting up a new dev server. Is it possible to connect to my account at gitlab.com via ssh and then create a new project? If so, how? If no, why not? Currently I get...

Raspbian log files


raspberry-pi,raspbian
Where can I find all boot, driver or kernel related logs on a Raspbian? Could you please reply with a list as follows: Driver logs - /something/somethingelse.log Thanks!...

Openshift port-forwarding [on hold]


java,git,netbeans,ssh,openshift
After many hours and many attempts, remains now your help. Im trying to do port-forwarding to access my DB in Openshift on Neatbeans. I've already done lots of tutorials, upgrade and downgrade versions of net-ssh, uninstall rhc and so on. I have read a lot git solutions (ssh_options[]...) and doesn't...

Capistrano and Corkscrew PATH error


ruby-on-rails,git,ssh,capistrano,gitlab
I'm trying to deploy my Rails application with Capistrano but when it comes to "git ls-remote" i get the following error: $ /usr/bin/env git ls-remote --heads [email protected]<server>:<project>.git /bin/bash: line 0: exec: corkscrew: not found DEBUG [a5205e2a] ssh_exchange_identification: Connection closed by remote host DEBUG [a5205e2a] fatal: The remote end hung up...

Capistrano deploy with bitbucket - Permission denied (publickey)


git,ssh,bitbucket
After adding public key to bitbucket acct, ssh -T [email protected] returns (in windows): The authenticity of host 'bitbucket.org (131.103.20.167)' can't be established. RSA key fingerprint is 65:8c:1b:f2:6f:91:6b:5c:3b:ec:4a:46:46:74:7z:40. Are you sure you want to continue connecting (yes/no)? yes Warning: Permanently added 'bitbucket.org' (RSA) to the list of known hosts. logged in...

Github: Permission denied (publickey) but I got “You've successfully authenticated” message


git,github,ssh
Step I had done: https://help.github.com/articles/generating-ssh-keys/ follow exactly. $ eval "$(ssh-agent -s)" Agent pid 31944 $ ssh-add Enter passphrase for /home/centos7/.ssh/id_rsa: Identity added: /home/centos7/.ssh/id_rsa (/home/centos7/.ssh/id_rsa) $ ssh-add -l 4096 ab:4d:23:23:99:ce:bb:9d:9f:9e:f9:b2:c8:1a:cd:f7 /home/centos7/.ssh/id_rsa (RSA) However, when I run $ git clone [email protected]:privateRepo/repo.git Cloning into 'repo'... The authenticity of host 'github.com (192.30.252.130)' can't be...

Python Flask persistent object between requests


python,rest,flask,raspberry-pi
I am creating a web interface for OMXPlayer on the Raspberry Pi. I'm trying to create a more REST like API for controlling the video while its playing. The issue I'm having is how to control the video while it is playing. Currently I can create a Player object which...

My While True loop is getting stuck in python


python,while-loop,raspberry-pi,infinite-loop,raspbian
Hello I have been working on an infinite While True loop for the main file in my python code. I am working on a Raspberry Pi and my goal is that whenever one of the GPIO Pins senses an input it will print out a string. However When I push...

how to correctly write command inside commands (ssh)?


bash,ssh
Here is the command I have which works It's just a kill with an expression which returns a number kill $(ps -ef | grep '[m]atchbox-panel --titlebar --start-applets showdesktop,windowselector' | cut -f8 -d' ') &> /dev/null Here is the ssh I normally use bash -c 'timeout 120s ssh -o StrictHostKeyChecking=no [email protected]

Java read bytes from Socket on Linux


linux,windows,sockets,network-programming,raspberry-pi
I'm trying to send a file from my Windows machine to my Raspberry-Pi 2, and I have a client and a server. The client should be able to send a zip file over the network to my server on my linux machine. I know my client and server work on...

Raspberry PI USB to RS232 adapter Receiving Only Ctrl Chars


python,serial-port,raspberry-pi,pyserial
I'm using a USB to RS232 cable for get communication with a pure rs232 device. With pyserial lib a got this code running in loopback tx -> rx cable pins. Setting the port: def __init__ (self, baudrate,timeout,parity,stopbits,bytesize): try: #self.s = serial.Serial(port="'/dev/ttyUSB0'",baudrate=baudrate,timeout=timeout,parity=parity,stopbits=stopbits,bytesize=bytesize) #self.s = serial.Serial("/dev/ttyUSB0",9600) self.s=serial.Serial( "/dev/ttyUSB0", baudrate=9600, parity=serial.PARITY_NONE, stopbits=serial.STOPBITS_ONE,...

ssh result seems to only be 16bits in python with paramiko


python,ssh,paramiko
im using paramiko in python 2.7 to connect to a cisco router, send a command and then parse the output of the command in a for loop. the problem seems to be that the returning result is limited to 65535 characters (16bits). I printed the output and pasted it in...

Access GPIO (/sys/class/gpio) as non-root


bash,raspberry-pi,chmod,chown,raspberry-pi2
The /sys/class/gpio can only be access as root by default. So I like that a new group gpio can use the files and dirs under /sys/class/gpio. To achieve that I added the following lines to /etc/rc.local (I'm on Debian): sudo chown root:gpio /sys/class/gpio/unexport /sys/class/gpio/export sudo chmod 220 /sys/class/gpio/unexport /sys/class/gpio/export So...

Python (3.4) run SSH commands on local terminal [closed]


python,ssh,terminal
I'm writing a script that I'm running through a terminal, and would like it to run BASH commands in that same terminal. All solutions that I found were geared toward connecting remotely through SSH, whereas I just need to run SSH commands on the same machine. Can someone please point...

BASH Script to SSH to another server and run commands as user


bash,ssh,cpanel
I read a lot though the forums and Google however I wasn't able to locate a workaround for this particular one. Basically my script is running on my local machine, then is SSH-ing onto a server with a different username (it works up until here), and on that machine I...

vi/fugitive: Gpush does not exit… sometimes


ssh,vi,vim-fugitive
I just started using fugitive in my workflow... very useful! But I've seem to have run into a weird annoyance that I'm hoping someone might have a solution to: When I run :Gpush, sometimes control never returns to vi. Vi hangs on the output of git push until I Ctrl+C...

How to install shared library and include files manually in linux?


linux,opencv,cmake,raspberry-pi
I am trying to build and install TBB library from source so that it can be used for OpenCV to take advantages of multiple cores on my raspberry pi. I was able to build TBB from source without any problems using this steps. (Source : How do I build OpenCV...

Expect Script through Putty works but not when called by scripts executed via http


ssh,expect
I have an expect script that connects to one of our remote servers, it runs a few commands as admin then exits. When i run the script through the Putty CLI it works properly. However when I call the script via http it fails, the script isn't presented with the...

Atlassian Stash - Permission Denied (publickey)


git,ssh,ssh-keys,atlassian-stash
I'm actually in the process of setting Atlassian Stash for my Workplace. I've ran into this issue which I'm not able to fix. Note, this is running on a Windows 7 64bits installation. When setting the SSH Keys, I followed the Stash Guide on how to create them and set...

Updating An Image on All instances of a website


php,jquery,html,ajax,raspberry-pi
So I have a Raspberry Pi controlling my Garage door. The Pi is running an apache webserver. I also have a camera connected to the raspberry pi and I want to be able to update the images from the camera. Currently I have the following code: garage.html: <html> <head> <meta...

Configure Git to use a .pem key from a specific location


git,ssh
Whenever I try to do a 'git pull origin master' I get (It is NOT Github): Permission denied (publickey). I am able to SSH into my AWS EC2 Linux sever, which has the bare repository, which I'm trying to pull from when I get the aforementioned permission error. I have...

setInterval doesn't get cleared, function keeps getting executed


javascript,node.js,socket.io,raspberry-pi
I have the following function: function monitorClimate() { var sensorReadingInterval; function startClimateMonitoring(interval) { sensorReadingInterval = setInterval(function() { io.emit('sensorReading', { temperature: sensor.getTemp() + 'C', humidity: sensor.getHumidity() + '%' }); }, interval); console.log('Climate control started!'); } function stopClimateMonitoring() { clearInterval(sensorReadingInterval); console.log('Climate control stopped!'); } return { start: startClimateMonitoring, stop: stopClimateMonitoring }; }...

Popen.kill() failing


python,raspberry-pi
Update 2: So I piped the output of stderr and it looks like when I include shell=True, i just get the help file for omx player (it lists all the command line switches and such). Is it possible that shell=True might not play nicely with omxplayer? Update: I came across...

Why doesn't “Set-Item” work on Windows 7 PowerShell?


windows,powershell,raspberry-pi
I am trying to install Windows 10 IoT on my Raspberry Pi 2. The PowerShell documentation tells me to put in this: Set-Item WSMan:\localhost\Client\TrustedHosts -Value <minwinpc> However, when I put it into my Windows 7 PowerShell, this comes out: At line:1 char:54 + Set-Item WSMan:\localhost\Client\TrustedHosts -Value <minwinpc> + ~ The...

Raspberry Pi MicroSD Boot not working, MicroSD card unreadable on PC


raspberry-pi
I downloaded the necessary files for Raspberry Pi onto a MicroSD card, although the MicroSD card is no longer readable. When I put the card into the computer through a MicroSD to USB adapter nothing shows up in Windows Explorer. The card isn't present in Windows Disk Management either. How...

How to open a new terminal from my working terminal with same directory in Linux?


linux,unix,ssh
Is there any command to open a new terminal from my working terminal with same directory while working with ssh in Linux? e.g., I am working in the following terminal. My pwd is /home/work/Kayan01/test_run I want to open a new terminal directly from my working terminal, so that the pwd...

run python script with arguments on a remote linux host


python,linux,ssh
I have this python script that I'm trying to run on a remote host. However, the script requires two arguments. For example, python script.py --port 4000 --service status Now when I run the script locally on the machine it works fine. How can I run this same script on a...

paramiko: NameError: global name 'descriptor' is not defined


python,python-2.7,ssh
I'm trying to use paramiko for SSH, but got an error: >>> import paramiko >>> ssh = paramiko.SSHClient() >>> ssh.set_missing_host_key_policy(paramiko.AutoAddPolicy()) >>> ssh.connect('54.***.***.110', key_filename='D:\Keys\MyOWN\priv.ppk') Traceback (most recent call last): File "<stdin>", line 1, in <module> File "build\bdist.win32\egg\paramiko\client.py", line 366, in connect File "build\bdist.win32\egg\paramiko\client.py", line 515, in _auth File "build\bdist.win32\egg\paramiko\agent.py",...

C++ chrono library on Raspberry Pi


c++,raspberry-pi,c++14,chrono
On a Raspberry Pi 2, I need to call a php file on a regular basis, typically every 100ms. I found this c++ code which looks like it does what I need and a test version of it compiles and runs fine using CodeBlock on Windows. I've updated the wheezy...

using sed to replace a line with back slashes in a shell script


regex,bash,shell,ssh,sed
I am trying to replace the bottom one of these 2 lines with sed in a file. <rule>out_prefix=orderid ^1\\d\+ updatemtnotif/</rule>\n\ <rule>out_prefix=orderid ^2\\d\+ updatemtnotif/</rule>\n\ And the following command seems to do that when executed as a command at the bash prompt sed -i '[email protected]_prefix=orderid ^2\\\\d\\+ updatemtnotif/@out_prefix=orderid ^2\\\\d\\+ updatemtnotif_fr/@g' /opt/temp/rules.txt however, when...

C# Simple SSH Connection And Send Command


c#,ssh,connection,sbt
this is the code i'm using SshClient cSSH = new SshClient("192.168.10.144", 22, "root", "pacaritambo"); cSSH.Connect(); SshCommand x = cSSH.RunCommand("exec \"/var/lib/asterisk/bin/retrieve_conf\""); cSSH.Disconnect(); cSSH.Dispose(); but i want to send command from a textbox so I've tried this SshCommand x = cSSH.RunCommand(textbox3.Text); but didn't work basically i want textbox3.Text as a ssh command....

How can I figure out which process is opening the certain tcp port?


linux,ssh,netstat,fuser
I usually use fuser command to check pid opening the certain tcp port like the following fuser 22/tcp //To get pid opening the 22 tcp port I've got a reference board which running a embedded linux. It have been already opening 22 tcp port for ssh connection. But fuser doesn't...

how to ssh run a tail and then send data to a mysql database


linux,bash,unix,ubuntu,ssh
This code SSH's and then runs a tail command on a remote hots. I would now like to pass that tailed data into a mysql database using a local script called insertPerfmon.sh. How do I pass data generated in a ssh session into the local shell script insertPerfmon.sh. The local...

Java and SSH looking to execute multiple commands from a file, across a list of hosts in another file and write the output to a file


java,ssh
“my-thoughts” Provided the code below. but it’s not working 100%. 1) if I have more than one command, the program won’t run. 2) one command in the command file, the script won’t execute properly. for example with “ls” the log file will have the following "Last login: Tue Jun 9...

how to immediately login through ssh?


bash,ssh
Here is my problem. I need to run a command ./deploy.sh -u 1540 This will fetch version 1540 of deploy.sh on SVN When I do, the script access SVN and ask for a password. I'm using ssh. It will first ask me a password since it guesses my SVN login...

How to verify SSH keys properly added for Git?


git,ssh
What's the command to verify SSH keys are properly added for git? There are 2 sets of keys under our ~/.ssh/ and we want to add both of them. What we did was to run ssh-add -l in git bash: $ ssh-add -l 2048 28:1b:b8:b2:a8:f1:9b:bb:b5:85:21:d5:d8:0b:00:b2 /c/Users/myuser/.ssh/bb_rsa (RSA) 2048 3d:31:e8:f7:f5:cd:dd:c7:0b:84:16:66:23:95:af:05 /c/Users/myuser/.ssh/id_rsa...

Expect script for checking ssh connection for a list of ips


shell,ssh,scripting,expect
Can anyone help me in creating an expect script to just do an SSH on a list of servers and check if it was fine. I do not need to interact, do not need to fire any command on each server, I just want to do an ssh and come...

Use same Python variable in multiple if-statements


python,if-statement,raspberry-pi,global-variables,bottle
I am having issues with my current Python script. The purpose of the 'progress' variable is take a specific value when it goes through one of the if-loops. But, the program never goes further then the first if-statement. It looks as if every if-statement makes his own variable called 'progress'....